USA ASTM S1 Alloy tool steel and S1 Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Category | Type | Steel Grade | Standard | Country | Application |
---|---|---|---|---|---|
Steel Grades | Tool Steel And Hard Alloy | S1 | ASTM | USA | Alloy tool steel |
D7 |
|||||
T30407 |
|||||
O1 |
|||||
T31501 |
|||||
O2 |
|||||
T31502 |
|||||
O6 |
|||||
T31506 |
|||||
O7 |
|||||
T31507 |
C(%) | Si(%) | Mn(%) | P(%) | S(%) | Cr(%) | Mo(%) | V(%) | W(%) |
---|---|---|---|---|---|---|---|---|
0.40~0.55 | 0.15~1.20 | 0.10~0.40 | ≤0.030 | ≤0.030 | 1.00~1.80 | ≤0.50 | 0.15~0.30 | 1.50~3.00 |
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
417 (≥) | 582 (≥) | 12 | 32 | 43 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 124 |
Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
---|---|---|---|---|---|---|---|
32 | - | - | 0.31 | - | |||
266 | 871 | - | 43.3 | 343 | - | ||
713 | - | 42 | 32.2 | 422 | 331 |
Heat treated : 1782°C - 1217°C
Grade | Standard | Country | Application |
---|---|---|---|
S1 | ASTM | USA | Alloy tool steel |
M3 Class1 | ASTM | USA | Molybdenum series High-speed tool steel |
X33CrS16 | DIN | Germany | Cold working alloy tool steel |
S12-1-4-5 | DIN | Germany | High-speed tool steel |
S10-4-3-10 | DIN | Germany | High-speed tool steel |
S18-1-2-5 | DIN | Germany | High-speed tool steel |
S18-1-2-15 | DIN | Germany | High-speed tool steel |
S18-1-2-10 | DIN | Germany | High-speed tool steel |
S12-1-4 | DIN | Germany | High-speed tool steel |
S12-1-2 | DIN | Germany | High-speed tool steel |
S18-0-1 | DIN | Germany | High-speed tool steel |
SKS11 | JIS | Japan | Alloy tool steel - Tool steel |
BS1 | UK | Carbide for cutting tools | |
BS1 | UK | Carbide for cutting tools | |
BS1 | UK | Carbide for cutting tools | |
BS1 | UK | Carbide for cutting tools | |
HS18-0-1 | AFNOR | France | Carbide for cutting tools |
HS18-0-1 | AFNOR | France | Carbide for cutting tools |
HS18-1-1-5 | AFNOR | France | Carbide for cutting tools |
HS18-1-1-5 | AFNOR | France | Carbide for cutting tools |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com