USA ASTM D7 Alloy tool steel and D7 Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Category | Type | Steel Grade | Standard | Country | Application |
---|---|---|---|---|---|
Steel Grades | Tool Steel And Hard Alloy | D7 | ASTM | USA | Alloy tool steel |
T30109 |
|||||
A10 |
|||||
T30110 |
|||||
D2 |
|||||
D3 |
|||||
T30403 |
|||||
D4 |
|||||
T30404 |
|||||
D5 |
|||||
T30405 |
C(%) | Si(%) | Mn(%) | P(%) | S(%) | Cr(%) | Mo(%) | V(%) |
---|---|---|---|---|---|---|---|
2.15~2.50 | 0.10~0.60 | 0.10~0.60 | ≤0.030 | ≤0.030 | 11.5~13.5 | 0.70~1.20 | 3.80~4.40 |
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
434 (≥) | 358 (≥) | 41 | 33 | 41 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 411 |
Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
---|---|---|---|---|---|---|---|
41 | - | - | 0.33 | - | |||
988 | 868 | - | 13.3 | 434 | - | ||
648 | - | 42 | 12.2 | 133 | 423 |
Heat treated : 1323°C - 1113°C
Grade | Standard | Country | Application |
---|---|---|---|
D7 | ASTM | USA | Alloy tool steel |
SKD7 | JIS | Japan | Hot-work die steel |
ZGD730-910 | GBT | China | Low alloy steel castings for general engineering and structural purposes |
ZGD730-910 | GBT | China | Low alloy steel castings for general engineering and structural purposes |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com