Russia ΧΒCГФ Carbide for cutting tools and ΧΒCГФ Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Category | Type | Steel Grade | Standard | Country | Application |
---|---|---|---|---|---|
Steel Grades | Tool Steel And Hard Alloy | ΧΒCГФ | Russia | Carbide for cutting tools | |
9ΧC |
|||||
9Г2Ф |
|||||
9Г2Ф |
|||||
XГC |
|||||
XГC |
|||||
9ΧΒГ |
|||||
9ΧΒГ |
|||||
ΧΒГ |
|||||
ΧΒГ |
|||||
ΧΒCГФ |
C(%) | Si(%) | Mn(%) | P(%) | S(%) | Cr(%) | Ni(%) | Mo(%) | V(%) | W(%) | Cu(%) | Ti(%) |
---|---|---|---|---|---|---|---|---|---|---|---|
0.90-1.05 | 0.65-1.00 | 0.60-0.90 | ≤0.030 | ≤0.030 | 0.60-1.10 | ≤0.35 | ≤0.30 | 0.05-0.15 | 0.50-0.80 | ≤0.30 | ≤0.03 |
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
832 (≥) | 159 (≥) | 13 | 11 | 13 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 122 |
Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
---|---|---|---|---|---|---|---|
32 | - | - | 0.34 | - | |||
643 | 573 | - | 12.3 | 444 | - | ||
171 | - | 23 | 31.2 | 224 | 124 |
Heat treated : 1561°C - 1456°C
Grade | Standard | Country | Application |
---|---|---|---|
8ΧΦ | ГОСТ | Russia | Carbide for cutting tools |
8ΧΦ | ГОСТ | Russia | Carbide for cutting tools |
8ΧΦ | ГОСТ | Russia | Carbide for cutting tools |
8ΧΦ | ГОСТ | Russia | Carbide for cutting tools |
9ΧΦ | ГОСТ | Russia | Carbide for cutting tools |
9ΧΦ | ГОСТ | Russia | Carbide for cutting tools |
9ΧΦΜ | EN | Russia | Carbide for cutting tools |
9ΧΦΜ | EN | Russia | Carbide for cutting tools |
11ΧΦ | ГОСТ | Russia | Carbide for cutting tools |
11ΧΦ | ГОСТ | Russia | Carbide for cutting tools |
13Χ | ГОСТ | Russia | Carbide for cutting tools |
13Χ | ГОСТ | Russia | Carbide for cutting tools |
ΧΒ4Φ | ГОСТ | Russia | Carbide for cutting tools |
ΧΒ4Φ | ГОСТ | Russia | Carbide for cutting tools |
9Χ1 | ГОСТ | Russia | Carbide for cutting tools |
9Χ1 | ГОСТ | Russia | Carbide for cutting tools |
Χ | ГОСТ | Russia | Carbide for cutting tools |
Χ | ГОСТ | Russia | Carbide for cutting tools |
12Χ1 | ГОСТ | Russia | Carbide for cutting tools |
12Χ1 | ГОСТ | Russia | Carbide for cutting tools |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
REQUEST FOR QUOTATION