Russia ГОСТ ΧΒ4Φ Carbide for cutting tools and ΧΒ4Φ Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Category | Type | Steel Grade | Standard | Country | Application |
---|---|---|---|---|---|
Steel Grades | Tool Steel And Hard Alloy | ΧΒ4Φ | ГОСТ | Russia | Carbide for cutting tools |
8ΧΦ |
|||||
9ΧΦ |
|||||
9ΧΦ |
|||||
9ΧΦΜ |
|||||
9ΧΦΜ |
|||||
11ΧΦ |
|||||
11ΧΦ |
|||||
13Χ |
|||||
13Χ |
|||||
ΧΒ4Φ |
C(%) | Si(%) | Mn(%) | P(%) | S(%) | Cr(%) | Ni(%) | Mo(%) | V(%) | W(%) | Cu(%) | Ti(%) |
---|---|---|---|---|---|---|---|---|---|---|---|
1.25-1.45 | 0.15-0.35 | 0.15-0.40 | ≤0.030 | ≤0.030 | 0.40-0.70 | ≤0.35 | ≤0.20 | 0.15-0.30 | 3.50-4.30 | ≤0.30 | ≤0.03 |
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
196 (≥) | 271 (≥) | 33 | 44 | 23 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 243 |
Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
---|---|---|---|---|---|---|---|
41 | - | - | 0.24 | - | |||
152 | 491 | - | 11.3 | 331 | - | ||
927 | - | 34 | 34.2 | 443 | 443 |
Heat treated : 1589°C - 1252°C
Grade | Standard | Country | Application |
---|---|---|---|
8ΧΦ | ГОСТ | Russia | Carbide for cutting tools |
8ΧΦ | ГОСТ | Russia | Carbide for cutting tools |
8ΧΦ | ГОСТ | Russia | Carbide for cutting tools |
8ΧΦ | ГОСТ | Russia | Carbide for cutting tools |
9ΧΦ | ГОСТ | Russia | Carbide for cutting tools |
9ΧΦ | ГОСТ | Russia | Carbide for cutting tools |
9ΧΦΜ | EN | Russia | Carbide for cutting tools |
9ΧΦΜ | EN | Russia | Carbide for cutting tools |
11ΧΦ | ГОСТ | Russia | Carbide for cutting tools |
11ΧΦ | ГОСТ | Russia | Carbide for cutting tools |
13Χ | ГОСТ | Russia | Carbide for cutting tools |
13Χ | ГОСТ | Russia | Carbide for cutting tools |
ΧΒ4Φ | ГОСТ | Russia | Carbide for cutting tools |
ΧΒ4Φ | ГОСТ | Russia | Carbide for cutting tools |
9Χ1 | ГОСТ | Russia | Carbide for cutting tools |
9Χ1 | ГОСТ | Russia | Carbide for cutting tools |
Χ | ГОСТ | Russia | Carbide for cutting tools |
Χ | ГОСТ | Russia | Carbide for cutting tools |
12Χ1 | ГОСТ | Russia | Carbide for cutting tools |
12Χ1 | ГОСТ | Russia | Carbide for cutting tools |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
REQUEST FOR QUOTATION