Russia ГОСТ 11ΧΦ Carbide for cutting tools and 11ΧΦ Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Category | Type | Steel Grade | Standard | Country | Application |
---|---|---|---|---|---|
Steel Grades | Tool Steel And Hard Alloy | 11ΧΦ | ГОСТ | Russia | Carbide for cutting tools |
у12,у12A,y13,у13A |
|||||
8ΧΦ |
|||||
8ΧΦ |
|||||
8ΧΦ |
|||||
8ΧΦ |
|||||
9ΧΦ |
|||||
9ΧΦ |
|||||
9ΧΦΜ |
|||||
9ΧΦΜ |
|||||
11ΧΦ |
C(%) | Si(%) | Mn(%) | P(%) | S(%) | Cr(%) | Ni(%) | Mo(%) | V(%) | W(%) | Cu(%) | Ti(%) |
---|---|---|---|---|---|---|---|---|---|---|---|
1.05-1.15 | 0.15-0.35 | 0.40-0.70 | ≤0.030 | ≤0.030 | 0.40-0.70 | ≤0.35 | ≤0.20 | 0.15-0.30 | ≤0.20 | ≤0.30 | ≤0.03 |
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
694 (≥) | 716 (≥) | 24 | 11 | 23 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 232 |
Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
---|---|---|---|---|---|---|---|
33 | - | - | 0.22 | - | |||
373 | 913 | - | 11.3 | 124 | - | ||
645 | - | 23 | 32.2 | 211 | 342 |
Heat treated : 1774°C - 1262°C
Grade | Standard | Country | Application |
---|---|---|---|
ASTM 1011 | ASTM | USA | General use carbon steel bar |
UNS G10110 | UNS | USA | General use carbon steel bar |
ASTM 1012 | ASTM | USA | General use carbon steel bar |
T11 | China | Carbon tool steel | |
H11 | ASTM | USA | Alloy tool steel |
T20811 | UNS | USA | Alloy tool steel |
T30110 | UNS | USA | Alloy tool steel |
T11301 | UNS | USA | Molybdenum series High-speed tool steel |
T11302 | UNS | USA | Molybdenum series High-speed tool steel |
T11313 | UNS | USA | Molybdenum series High-speed tool steel |
T11323 | UNS | USA | Molybdenum series High-speed tool steel |
T11304 | UNS | USA | Molybdenum series High-speed tool steel |
T11306 | UNS | USA | Molybdenum series High-speed tool steel |
T11307 | UNS | USA | Molybdenum series High-speed tool steel |
T11310 | UNS | USA | Molybdenum series High-speed tool steel |
T11330 | UNS | USA | Molybdenum series High-speed tool steel |
T11333 | UNS | USA | Molybdenum series High-speed tool steel |
T11334 | UNS | USA | Molybdenum series High-speed tool steel |
T11336 | UNS | USA | Molybdenum series High-speed tool steel |
T11341 | UNS | USA | Molybdenum series High-speed tool steel |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
REQUEST FOR QUOTATION