Russia ГОСТ 12Χ1 Carbide for cutting tools and 12Χ1 Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Category | Type | Steel Grade | Standard | Country | Application |
---|---|---|---|---|---|
Steel Grades | Tool Steel And Hard Alloy | 12Χ1 | ГОСТ | Russia | Carbide for cutting tools |
13Χ |
|||||
ΧΒ4Φ |
|||||
ΧΒ4Φ |
|||||
Β2Φ |
|||||
Β2Φ |
|||||
9Χ1 |
|||||
9Χ1 |
|||||
Χ |
|||||
Χ |
|||||
12Χ1 |
C(%) | Si(%) | Mn(%) | P(%) | S(%) | Cr(%) | Ni(%) | Mo(%) | V(%) | W(%) | Cu(%) | Ti(%) |
---|---|---|---|---|---|---|---|---|---|---|---|
1.15-1.25 | 0.15-0.35 | 0.30-0.60 | ≤0.030 | ≤0.030 | 1.30-1.65 | ≤0.35 | ≤0.20 | ≤0.15 | ≤0.20 | ≤0.30 | ≤0.03 |
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
921 (≥) | 115 (≥) | 23 | 43 | 31 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 111 |
Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
---|---|---|---|---|---|---|---|
14 | - | - | 0.43 | - | |||
889 | 652 | - | 23.3 | 242 | - | ||
578 | - | 12 | 32.2 | 232 | 332 |
Heat treated : 1683°C - 1444°C
Grade | Standard | Country | Application |
---|---|---|---|
UNS G10120 | UNS | USA | General use carbon steel bar |
T12 | China | Carbon tool steel | |
Cr12 | China | Alloy tool steel - cold work steels | |
Cr12Mo1V1 | China | Alloy tool steel - cold work steels | |
Cr12MoV | China | Alloy tool steel - cold work steels | |
SMCr12Mo1V1 | China | Plastic mould with flat steel | |
W12Cr4V5Co5 | China | High-speed tool steel | |
H12 | ASTM | USA | Alloy tool steel |
T20812 | UNS | USA | Alloy tool steel |
H13 | ASTM | USA | Alloy tool steel |
T12002 | UNS | USA | Tungsten series High-Speed Tool Steel |
T12004 | UNS | USA | Tungsten series High-Speed Tool Steel |
T12005 | UNS | USA | Tungsten series High-Speed Tool Steel |
T12006 | UNS | USA | Tungsten series High-Speed Tool Steel |
T12008 | UNS | USA | Tungsten series High-Speed Tool Steel |
T12015 | UNS | USA | Tungsten series High-Speed Tool Steel |
CH-12 | ASTM | USA | Casting tool steels and powder metallurgy tool steel |
CQ-12 | AISI | USA | W-Co class carbide |
CY-12 | AISI | USA | W-Ti-Co class carbide |
Stellite 12 | Stellite alloy |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
REQUEST FOR QUOTATION