Russia ГОСТ 9Г2Ф Carbide for cutting tools and 9Г2Ф Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Category | Type | Steel Grade | Standard | Country | Application |
---|---|---|---|---|---|
Steel Grades | Tool Steel And Hard Alloy | 9Г2Ф | ГОСТ | Russia | Carbide for cutting tools |
Β2Φ |
|||||
9Χ1 |
|||||
9Χ1 |
|||||
Χ |
|||||
Χ |
|||||
12Χ1 |
|||||
12Χ1 |
|||||
9ΧC |
|||||
9ΧC |
|||||
9Г2Ф |
C(%) | Si(%) | Mn(%) | P(%) | S(%) | Ni(%) | Mo(%) | V(%) | W(%) | Cu(%) | Ti(%) |
---|---|---|---|---|---|---|---|---|---|---|
0.85-0.95 | 0.10-0.40 | 1.70-2.20 | ≤0.030 | ≤0.030 | ≤0.35 | ≤0.20 | 0.10-0.30 | ≤0.20 | ≤0.30 | ≤0.03 |
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
183 (≥) | 248 (≥) | 23 | 33 | 33 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 342 |
Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
---|---|---|---|---|---|---|---|
41 | - | - | 0.32 | - | |||
527 | 886 | - | 31.3 | 334 | - | ||
928 | - | 12 | 21.2 | 421 | 421 |
Heat treated : 1926°C - 1395°C
Grade | Standard | Country | Application |
---|---|---|---|
Q195 | GBT | China | Engineering and welding |
UNS G10190 | UNS | USA | General use carbon steel bar |
ASTM 1019 | ASTM | USA | General use carbon steel bar |
T9 | China | Carbon tool steel | |
9SiCr | China | Alloy tool steel - Measuring tool steel cutting tools | |
9Cr2 | China | Alloy tool steel - Measuring tool steel cutting tools | |
W2Mo9Cr4V2 | China | High-speed tool steel | |
W2Mo9Cr4VCo8 | China | High-speed tool steel | |
W9Mo3Cr4V | China | High-speed tool steel | |
W9Mo3Cr4V coil | China | Saw high-speed tool steel hot-rolled steel strip | |
H19 | ASTM | USA | Alloy tool steel |
T20819 | UNS | USA | Alloy tool steel |
A9 | ASTM | USA | Alloy tool steel |
T30109 | UNS | USA | Alloy tool steel |
T41902 | UNS | USA | Alloy tool steel |
T41904 | UNS | USA | Alloy tool steel |
T41905 | UNS | USA | Alloy tool steel |
T41906 | UNS | USA | Alloy tool steel |
T41907 | UNS | USA | Alloy tool steel |
CPM H19 | AISI | USA | Powder metallurgy tool steel Hot work tool steels |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
REQUEST FOR QUOTATION