ISO ISO ISO H1 ISO standard iron grain size heat resistant steel and ISO H1 Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Category | Type | Steel Grade | Standard | Country | Application |
---|---|---|---|---|---|
Steel Grades | Special Alloy | ISO H1 | ISO | ISO | ISO standard iron grain size heat resistant steel |
ISO X2CrNiN18-10 Tube |
|||||
ISO X2CrNiMoN17-13 Tube |
|||||
ISO X9CrNi18-8 |
|||||
ISO X5CrNiMo17-12-2 wire |
|||||
ISO X7CrNiAl17-7 wire |
|||||
ISO X5CrNi18-10 strip |
|||||
ISO X12CrNi17-7 strip |
|||||
ISO X6CrNiMo17-12-2 strip |
|||||
ISO X7CrNiAl17-7 strip |
|||||
ISO X6CrTi12 |
C(%) | Si(%) | Mn(%) | P(%) | S(%) | Cr(%) | Ni(%) | Ti(%) |
---|---|---|---|---|---|---|---|
Max 0.08 | Max 1.0 | Max 1.0 | Max 0.04 | Max 0.030 | 10.5-12.5 | Max 1.0 | 6x%C≤1.0 |
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
848 (≥) | 119 (≥) | 24 | 12 | 41 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 313 |
Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
---|---|---|---|---|---|---|---|
41 | - | - | 0.14 | - | |||
359 | 453 | - | 11.3 | 133 | - | ||
696 | - | 24 | 34.2 | 323 | 242 |
Heat treated : 1752°C - 1264°C
Grade | Standard | Country | Application |
---|---|---|---|
H11 | ASTM | USA | Alloy tool steel |
H12 | ASTM | USA | Alloy tool steel |
H14 | ASTM | USA | Alloy tool steel |
H19 | ASTM | USA | Alloy tool steel |
CPM H13 | AISI | USA | Powder metallurgy tool steel Hot work tool steels |
CPM H19 | AISI | USA | Powder metallurgy tool steel Hot work tool steels |
CPM H19V | AISI | USA | Powder metallurgy tool steel Hot work tool steels |
SKH10 | JIS | Japan | Tungsten series high speed tool steel |
H1 | JIS | Japan | Carbide for cutting tools |
H1 | JIS | Japan | Carbide for cutting tools |
:BH10 | UK | Carbide for cutting tools | |
:BH10 | UK | Carbide for cutting tools | |
BH10A | UK | Carbide for cutting tools | |
BH10A | UK | Carbide for cutting tools | |
BH11 | UK | Carbide for cutting tools | |
BH11 | UK | Carbide for cutting tools | |
BH11 | UK | Carbide for cutting tools | |
BH11 | UK | Carbide for cutting tools | |
BH12 | UK | Carbide for cutting tools | |
BH12 | UK | Carbide for cutting tools |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com