Japan JIS SKH10 Tungsten series high speed tool steel and SKH10 Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
| Category | Type | Steel Grade | Standard | Country | Application |
|---|---|---|---|---|---|
| Steel Grades | Tool Steel And Hard Alloy | SKH10 | JIS | Japan | Tungsten series high speed tool steel |
| SKD61 |
|||||
| SKD62 |
|||||
| SKD7 |
|||||
| SKD8 |
|||||
| SKT3 |
|||||
| SKT4 |
|||||
| SKT6 |
|||||
| SKH2 |
|||||
| SKH3 |
|||||
| SKH4 |
| C(%) | Si(%) | Mn(%) | Cr(%) | V(%) | W(%) | Co(%) |
|---|---|---|---|---|---|---|
| 1.45-1.60 | Max 0.45 | Max 0.40 | 3.80-4.50 | 4.20-5.20 | 11.50-13.50 | 4.20-5.20 |
| Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 542 (≥) | 141 (≥) | 31 | 14 | 33 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 132 |
| Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
|---|---|---|---|---|---|---|---|
| 14 | - | - | 0.34 | - | |||
| 685 | 153 | - | 13.3 | 244 | - | ||
| 635 | - | 24 | 11.2 | 321 | 114 |
Heat treated : 1783°C - 1343°C
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com