ISO ISO ISO H2 ISO standard thermal deformation of stainless steel and ISO H2 Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Category | Type | Steel Grade | Standard | Country | Application |
---|---|---|---|---|---|
Steel Grades | Special Alloy | ISO H2 | ISO | ISO | ISO standard thermal deformation of stainless steel |
ISO X2CrNiMoN17-13 Tube |
|||||
ISO X9CrNi18-8 |
|||||
ISO X5CrNiMo17-12-2 wire |
|||||
ISO X7CrNiAl17-7 wire |
|||||
ISO X5CrNi18-10 strip |
|||||
ISO X12CrNi17-7 strip |
|||||
ISO X6CrNiMo17-12-2 strip |
|||||
ISO X7CrNiAl17-7 strip |
|||||
ISO X6CrTi12 |
|||||
ISO H1 |
C(%) | Si(%) | Mn(%) | P(%) | S(%) | Cr(%) | Ni(%) |
---|---|---|---|---|---|---|
Max 0.080 | Max 1.00 | Max 1.00 | Max 0.040 | Max 0.030 | 11.5-14.0 | Max 0.75 |
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
431 (≥) | 252 (≥) | 31 | 13 | 22 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 134 |
Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
---|---|---|---|---|---|---|---|
24 | - | - | 0.32 | - | |||
136 | 862 | - | 21.3 | 231 | - | ||
876 | - | 21 | 14.2 | 121 | 111 |
Heat treated : 1421°C - 1126°C
Grade | Standard | Country | Application |
---|---|---|---|
H21 | ASTM | USA | Alloy tool steel |
H22 | ASTM | USA | Alloy tool steel |
H24 | ASTM | USA | Alloy tool steel |
H25 | ASTM | USA | Alloy tool steel |
H26 | ASTM | USA | Alloy tool steel |
SKH2 | JIS | Japan | Tungsten series high speed tool steel |
H2 | JIS | Japan | Carbide for cutting tools |
H2 | JIS | Japan | Carbide for cutting tools |
BH21 | UK | Carbide for cutting tools | |
BH21 | UK | Carbide for cutting tools | |
BH21A | UK | Carbide for cutting tools | |
BH21A | UK | Carbide for cutting tools | |
BH26 | UK | Carbide for cutting tools | |
BH26 | UK | Carbide for cutting tools | |
BH224/5 | UK | Carbide for cutting tools | |
BH224/5 | UK | Carbide for cutting tools | |
TH2 | AFNOR | France | Carbide for cutting tools |
TH2 | AFNOR | France | Carbide for cutting tools |
H20 | AFNOR | France | Carbide for cutting tools |
H20 | AFNOR | France | Carbide for cutting tools |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com