Japan JIS H2 Carbide for cutting tools and H2 Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Category | Type | Steel Grade | Standard | Country | Application |
---|---|---|---|---|---|
Steel Grades | Tool Steel And Hard Alloy | H2 | JIS | Japan | Carbide for cutting tools |
G6 |
|||||
G7 |
|||||
G7 |
|||||
G8 |
|||||
G8 |
|||||
G10E |
|||||
G10E |
|||||
H1 |
|||||
H1 |
|||||
H2 |
W(%) | Other(%) |
---|---|
91 | TiC+Ta(Nb)C:2.5 |
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
731 (≥) | 582 (≥) | 23 | 44 | 42 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 224 |
Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
---|---|---|---|---|---|---|---|
42 | - | - | 0.31 | - | |||
179 | 827 | - | 44.3 | 144 | - | ||
881 | - | 21 | 41.2 | 341 | 332 |
Heat treated : 1819°C - 1373°C
Grade | Standard | Country | Application |
---|---|---|---|
H21 | ASTM | USA | Alloy tool steel |
H22 | ASTM | USA | Alloy tool steel |
H24 | ASTM | USA | Alloy tool steel |
H25 | ASTM | USA | Alloy tool steel |
H26 | ASTM | USA | Alloy tool steel |
SKH2 | JIS | Japan | Tungsten series high speed tool steel |
H2 | JIS | Japan | Carbide for cutting tools |
H2 | JIS | Japan | Carbide for cutting tools |
BH21 | UK | Carbide for cutting tools | |
BH21 | UK | Carbide for cutting tools | |
BH21A | UK | Carbide for cutting tools | |
BH21A | UK | Carbide for cutting tools | |
BH26 | UK | Carbide for cutting tools | |
BH26 | UK | Carbide for cutting tools | |
BH224/5 | UK | Carbide for cutting tools | |
BH224/5 | UK | Carbide for cutting tools | |
TH2 | AFNOR | France | Carbide for cutting tools |
TH2 | AFNOR | France | Carbide for cutting tools |
H20 | AFNOR | France | Carbide for cutting tools |
H20 | AFNOR | France | Carbide for cutting tools |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com