Japan JIS G7 Carbide for cutting tools and G7 Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Category | Type | Steel Grade | Standard | Country | Application |
---|---|---|---|---|---|
Steel Grades | Tool Steel And Hard Alloy | G7 | JIS | Japan | Carbide for cutting tools |
F1 |
|||||
F1 |
|||||
G2 |
|||||
G2 |
|||||
G3 |
|||||
G3 |
|||||
G5 |
|||||
G6 |
|||||
G6 |
|||||
G7 |
W(%) | Other(%) |
---|---|
80 | Co+Ni:20 |
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
292 (≥) | 769 (≥) | 23 | 31 | 14 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 331 |
Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
---|---|---|---|---|---|---|---|
44 | - | - | 0.42 | - | |||
355 | 983 | - | 43.3 | 442 | - | ||
344 | - | 14 | 42.2 | 121 | 333 |
Heat treated : 1998°C - 1378°C
Grade | Standard | Country | Application |
---|---|---|---|
G7 | JIS | Japan | Carbide for cutting tools |
G7 | JIS | Japan | Carbide for cutting tools |
EN 2CSG7 | EN | Euronorm | Euronorm Structural steel |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com