UK :BH10 Carbide for cutting tools and :BH10 Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Category | Type | Steel Grade | Standard | Country | Application |
---|---|---|---|---|---|
Steel Grades | Tool Steel And Hard Alloy | :BH10 | UK | Carbide for cutting tools | |
BD2A |
|||||
BD3 |
|||||
BD3 |
|||||
BF1 |
|||||
BF1 |
|||||
BL1 |
|||||
BL1 |
|||||
BL3 |
|||||
BL3 |
|||||
:BH10 |
C(%) | Si(%) | Mn(%) | Cr(%) | Ni(%) | Mo(%) | V(%) | Other(%) |
---|---|---|---|---|---|---|---|
0.30-0.40 | 0.75-1.10 | ≤0.40 | 2.80-3.20 | ≤0.40 | 2.65-2.95 | 0.30-0.50 | Cu≤0.20,Sn≤0.05,Co2.80-3.20 |
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
475 (≥) | 669 (≥) | 22 | 14 | 12 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 221 |
Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
---|---|---|---|---|---|---|---|
13 | - | - | 0.31 | - | |||
476 | 733 | - | 13.3 | 423 | - | ||
278 | - | 33 | 14.2 | 234 | 321 |
Heat treated : 1781°C - 1559°C
Grade | Standard | Country | Application |
---|---|---|---|
:BH10 | UK | Carbide for cutting tools | |
:BH10 | UK | Carbide for cutting tools | |
:BP30 | UK | Carbide for cutting tools | |
:BP30 | UK | Carbide for cutting tools | |
BHMA①:9-1-9 | UK | Carbide for cutting tools | |
BHMA①:9-1-9 | UK | Carbide for cutting tools | |
BHMA①:7-1-9 | UK | Carbide for cutting tools | |
BHMA①:7-1-9 | UK | Carbide for cutting tools | |
BHMA①:9-2-6 | UK | Carbide for cutting tools | |
BHMA①:9-2-6 | UK | Carbide for cutting tools | |
BHMA①:6-3-5 | UK | Carbide for cutting tools | |
BHMA①:6-3-5 | UK | Carbide for cutting tools | |
BHMA①:7-2-6 | UK | Carbide for cutting tools | |
BHMA①:7-2-6 | UK | Carbide for cutting tools | |
BHMA①:4-4-4 | UK | Carbide for cutting tools | |
BHMA①:4-4-4 | UK | Carbide for cutting tools | |
BHMA①:3-4-4 | UK | Carbide for cutting tools | |
BHMA①:3-4-4 | UK | Carbide for cutting tools | |
BHMA①:3-5-3 | UK | Carbide for cutting tools | |
BHMA①:3-5-3 | UK | Carbide for cutting tools |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com