SKH 57 Tool Steel and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Category | Type | Steel Grade | Standard | Country | Application |
---|---|---|---|---|---|
Steel Grades | Tool Steel | SKH 57 | |||
SKH 4 |
|||||
SKH 10 |
|||||
SKH 40 |
|||||
SKH 50 |
|||||
SKH 51 |
|||||
SKH 52 |
|||||
SKH 53 |
|||||
SKH 54 |
|||||
SKH 55 |
|||||
SKH 56 |
C ≤ |
Si ≤ |
Mn ≤ |
P ≤ |
S ≤ |
Cr | Ni |
---|---|---|---|---|---|---|
1.2-1.35 | 0.45 | 0.4 | 0.03 | 0.03 | 3.8-4.5 | |
Mo | Al | Cu | Nb | W | V | Ce |
3.2-3.9 | 9.0-10.0 | 3.0-3.5 | ||||
N | Co | Pb | B | Other | ||
9.5-10.5 | ||||||
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
947 (≥) | 157 (≥) | 11 | 14 | 32 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 111 |
Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
---|---|---|---|---|---|---|---|
34 | - | - | 0.23 | - | |||
783 | 792 | - | 43.3 | 442 | - | ||
889 | - | 42 | 23.2 | 433 | 312 |
Heat treated : 1524°C - 1599°C
Grade | Standard | Country | Application |
---|---|---|---|
SKH2 | JIS | Japan | Tungsten series high speed tool steel |
SKH3 | JIS | Japan | Tungsten series high speed tool steel |
SKH4 | JIS | Japan | Tungsten series high speed tool steel |
SKH10 | JIS | Japan | Tungsten series high speed tool steel |
SKH40 | JIS | Japan | Powder metallurgy high-speed tool steel |
SKH50 | JIS | Japan | W-phase system high-speed tool steel |
SKH51 | JIS | Japan | W-phase system high-speed tool steel |
SKH52 | JIS | Japan | W-phase system high-speed tool steel |
SKH53 | JIS | Japan | W-phase system high-speed tool steel |
SKH54 | JIS | Japan | W-phase system high-speed tool steel |
SKH55 | JIS | Japan | W-phase system high-speed tool steel |
SKH56 | JIS | Japan | W-phase system high-speed tool steel |
SKH57 | JIS | Japan | W-phase system high-speed tool steel |
SKH58 | JIS | Japan | W-phase system high-speed tool steel |
SKH59 | JIS | Japan | W-phase system high-speed tool steel |
SKH3 | Sweden | Carbide for cutting tools | |
SKH3 | Sweden | Carbide for cutting tools | |
SKH59 | |||
SKH59 | |||
SKH53 | China | Carbide for cutting tools |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com