Japan JIS SKH55 W-phase system high-speed tool steel and SKH55 Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Category | Type | Steel Grade | Standard | Country | Application |
---|---|---|---|---|---|
Steel Grades | Tool Steel And Hard Alloy | SKH55 | JIS | Japan | W-phase system high-speed tool steel |
SKH2 |
|||||
SKH3 |
|||||
SKH4 |
|||||
SKH10 |
|||||
SKH40 |
|||||
SKH50 |
|||||
SKH51 |
|||||
SKH52 |
|||||
SKH53 |
|||||
SKH54 |
C(%) | Si(%) | Mn(%) | Cr(%) | Mo(%) | V(%) | W(%) | Co(%) |
---|---|---|---|---|---|---|---|
0.87-0.95 | Max 0.45 | Max 0.40 | 3.80-4.50 | 4.70-5.20 | 1.70-2.10 | 5.90-6.70 | 4.50-5.00 |
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
657 (≥) | 148 (≥) | 43 | 22 | 21 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 134 |
Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
---|---|---|---|---|---|---|---|
33 | - | - | 0.32 | - | |||
867 | 967 | - | 34.3 | 323 | - | ||
973 | - | 31 | 22.2 | 122 | 244 |
Heat treated : 1249°C - 1732°C
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com