Japan JIS SKH59 W-phase system high-speed tool steel and SKH59 Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Category | Type | Steel Grade | Standard | Country | Application |
---|---|---|---|---|---|
Steel Grades | Tool Steel And Hard Alloy | SKH59 | JIS | Japan | W-phase system high-speed tool steel |
SKH40 |
|||||
SKH50 |
|||||
SKH51 |
|||||
SKH52 |
|||||
SKH53 |
|||||
SKH54 |
|||||
SKH55 |
|||||
SKH56 |
|||||
SKH57 |
|||||
SKH58 |
C(%) | Si(%) | Mn(%) | Cr(%) | Mo(%) | V(%) | W(%) | Co(%) |
---|---|---|---|---|---|---|---|
1.05-1.15 | Max 0.70 | Max 0.40 | 3.50-4.50 | 9.00-10.00 | 0.90-1.30 | 1.20-1.90 | 7.50-8.50 |
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
516 (≥) | 856 (≥) | 32 | 34 | 41 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 221 |
Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
---|---|---|---|---|---|---|---|
21 | - | - | 0.34 | - | |||
551 | 679 | - | 34.3 | 342 | - | ||
385 | - | 12 | 13.2 | 232 | 144 |
Heat treated : 1579°C - 1226°C
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com