USA ASTM CH-13 Casting tool steels and powder metallurgy tool steel and CH-13 Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
| Category | Type | Steel Grade | Standard | Country | Application |
|---|---|---|---|---|---|
| Steel Grades | Tool Steel And Hard Alloy | CH-13 | ASTM | USA | Casting tool steels and powder metallurgy tool steel |
| T11350 |
|||||
| M52 |
|||||
| T11352 |
|||||
| CA-2 |
|||||
| CD-2 |
|||||
| CD-5 |
|||||
| CM-2 |
|||||
| CS-5 |
|||||
| CS-7 |
|||||
| CH-12 |
| C(%) | Si(%) | Mn(%) | P(%) | S(%) | Cr(%) | Mo(%) | V(%) |
|---|---|---|---|---|---|---|---|
| 0.30-0.42 | Max 1.50 | Max 0.75 | Max 0.030 | Max 0.030 | 4.75-5.75 | 1.25-1.75 | 0.75-1.20 |
| Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 874 (≥) | 161 (≥) | 41 | 34 | 13 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 332 |
| Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
|---|---|---|---|---|---|---|---|
| 43 | - | - | 0.43 | - | |||
| 155 | 929 | - | 21.3 | 114 | - | ||
| 131 | - | 43 | 44.2 | 431 | 312 |
Heat treated : 1739°C - 1793°C
| Grade | Standard | Country | Application |
|---|---|---|---|
| CH-13 | ASTM | USA | Casting tool steels and powder metallurgy tool steel |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com