USA ASTM CS-5 Casting tool steels and powder metallurgy tool steel and CS-5 Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Category | Type | Steel Grade | Standard | Country | Application |
---|---|---|---|---|---|
Steel Grades | Tool Steel And Hard Alloy | CS-5 | ASTM | USA | Casting tool steels and powder metallurgy tool steel |
M48 |
|||||
M62 |
|||||
M50 |
|||||
T11350 |
|||||
M52 |
|||||
T11352 |
|||||
CA-2 |
|||||
CD-2 |
|||||
CD-5 |
|||||
CM-2 |
C(%) | Si(%) | Mn(%) | P(%) | S(%) | Cr(%) | Mo(%) | V(%) |
---|---|---|---|---|---|---|---|
0.50-0.65 | 1.75-2.25 | 0.60-1.00 | Max 0.030 | Max 0.030 | Max 0.35 | 0.20-0.80 | Max 0.35 |
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
595 (≥) | 966 (≥) | 22 | 11 | 33 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 314 |
Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
---|---|---|---|---|---|---|---|
31 | - | - | 0.31 | - | |||
557 | 196 | - | 41.3 | 242 | - | ||
855 | - | 23 | 44.2 | 441 | 112 |
Heat treated : 1641°C - 1618°C
Grade | Standard | Country | Application |
---|---|---|---|
CS-5 | ASTM | USA | Casting tool steels and powder metallurgy tool steel |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com