USA ASTM 3A,3Q Carbon and Low Alloy Steel for General Application, and Cobalt Alloy for High Strength at Elevated Temperatures and 3A,3Q Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Category | Type | Steel Grade | Standard | Country | Application |
---|---|---|---|---|---|
Steel Grades | Special Alloy | 3A,3Q | ASTM | USA | Carbon and Low Alloy Steel for General Application, and Cobalt Alloy for High Strength at Elevated Temperatures |
J03001 |
|||||
J03501 |
|||||
J02501 |
|||||
Gr 485 |
|||||
Gr 620 |
|||||
Gr 825 |
|||||
Grade21 |
|||||
Grade31 |
|||||
1A |
|||||
2A,2Q |
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
986 (≥) | 777 (≥) | 33 | 44 | 23 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 334 |
Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
---|---|---|---|---|---|---|---|
42 | - | - | 0.33 | - | |||
911 | 916 | - | 41.3 | 213 | - | ||
412 | - | 13 | 32.2 | 121 | 314 |
Heat treated : 1384°C - 1355°C
Grade | Standard | Country | Application |
---|---|---|---|
у13A-1 | ГОСТ | Russia | Carbide for cutting tools |
у13A-1 | ГОСТ | Russia | Carbide for cutting tools |
у13A-2 | ГОСТ | Russia | Carbide for cutting tools |
у13A-2 | ГОСТ | Russia | Carbide for cutting tools |
у13A-3 | ГОСТ | Russia | Carbide for cutting tools |
у13A-3 | ГОСТ | Russia | Carbide for cutting tools |
SUS13AA-CF | JIS | Japan | stainless steel |
Z4CND22-16-03Az | AFNOR | France | Hot-Rolled stainless steel bar and wire rod (NF A 35-574 (1990)) |
ASTM CF3A | AISI | USA | |
ASTM 3A,3Q | AISI | USA | |
3a | STAS/SR | Romania | Structural steel |
N3333A | ABNT | Brazil | Brazil Stainless steel |
STKM13A | CNS | China | China Taiwan Structural steel |
EN NiCr20Co13Mo4Ti3Al | EN | Euronorm | Euronorm Stainless Steel |
0Cr13Al | GBT | China | Ferrite |
GH33A | GBT | China | wrought Fe/Ni-base superalloy |
K423A | GBT | China | conventional cast superalloy |
K23A | GBT | China | conventional cast superalloy |
1Cr13Al4 | GBT | China | High resistance alloys for electrical heating |
0Cr23Al5 | GBT | China | High resistance alloys for electrical heating |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com