USA ASTM 2A,2Q Carbon and Low Alloy Steel for General Application, and Cobalt Alloy for High Strength at Elevated Temperatures and 2A,2Q Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Category | Type | Steel Grade | Standard | Country | Application |
---|---|---|---|---|---|
Steel Grades | Special Alloy | 2A,2Q | ASTM | USA | Carbon and Low Alloy Steel for General Application, and Cobalt Alloy for High Strength at Elevated Temperatures |
J03000 |
|||||
J03001 |
|||||
J03501 |
|||||
J02501 |
|||||
Gr 485 |
|||||
Gr 620 |
|||||
Gr 825 |
|||||
Grade21 |
|||||
Grade31 |
|||||
1A |
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
621 (≥) | 711 (≥) | 22 | 22 | 31 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 114 |
Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
---|---|---|---|---|---|---|---|
22 | - | - | 0.11 | - | |||
942 | 139 | - | 21.3 | 214 | - | ||
156 | - | 41 | 32.2 | 342 | 221 |
Heat treated : 1442°C - 1669°C
Grade | Standard | Country | Application |
---|---|---|---|
7Mn15Cr2A13V2WMo | China | Alloy tool steel - Without magnetic steel mold | |
W6Mo5Cr4V2Al | China | High-speed tool steel | |
T12A | JIS | Japan | Carbide for cutting tools |
T12A | JIS | Japan | Carbide for cutting tools |
BD2A | UK | Carbide for cutting tools | |
BD2A | UK | Carbide for cutting tools | |
BT1 | UK | Carbide for cutting tools | |
BT1 | UK | Carbide for cutting tools | |
у12A-1 | ГОСТ | Russia | Carbide for cutting tools |
у12A-1 | ГОСТ | Russia | Carbide for cutting tools |
у12A-2 | ГОСТ | Russia | Carbide for cutting tools |
у12A-2 | ГОСТ | Russia | Carbide for cutting tools |
у12A-3 | ГОСТ | Russia | Carbide for cutting tools |
у12A-3 | ГОСТ | Russia | Carbide for cutting tools |
SUS304N2A | JIS | Japan | martensitic stainless steel |
Z2CND25-22Az | AFNOR | France | Stainless steel palte & Steel Strip |
Z3CND17-12Az | AFNOR | France | Stainless Steel Plate & Steel Strip |
Z2CND25-22Az | AFNOR | France | Boiler & Pressure Vessel Plate (NF A 35-209(1992)) |
Z20CN21-12Az | AFNOR | France | Steel Exhaust Valves |
Z50CMNNb21-09-02Az | AFNOR | France | Steel Exhaust Valves |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com