Russia ГОСТ у13A-2 Carbide for cutting tools and у13A-2 Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Category | Type | Steel Grade | Standard | Country | Application |
---|---|---|---|---|---|
Steel Grades | Tool Steel And Hard Alloy | у13A-2 | ГОСТ | Russia | Carbide for cutting tools |
у12A-2 |
|||||
у12A-3 |
|||||
у12A-3 |
|||||
у13-1 |
|||||
у13-1 |
|||||
у13-3 |
|||||
у13-3 |
|||||
у13A-1 |
|||||
у13A-1 |
|||||
у13A-2 |
C(%) | Si(%) | Mn(%) | P(%) | S(%) | Cr(%) | Ni(%) | Cu(%) |
---|---|---|---|---|---|---|---|
1.25-1.35 | 0.17-0.33 | 0.17-0.28 | ≤0.025 | ≤0.018 | ≤0.12 | 0.12 | 0.20 |
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
853 (≥) | 363 (≥) | 33 | 14 | 23 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 342 |
Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
---|---|---|---|---|---|---|---|
24 | - | - | 0.42 | - | |||
839 | 861 | - | 41.3 | 123 | - | ||
215 | - | 14 | 33.2 | 144 | 241 |
Heat treated : 1852°C - 1873°C
Grade | Standard | Country | Application |
---|---|---|---|
у8-3 | ГОСТ | Russia | Carbide for cutting tools |
у8-3 | ГОСТ | Russia | Carbide for cutting tools |
у8A-1 | ГОСТ | Russia | Carbide for cutting tools |
у8A-1 | ГОСТ | Russia | Carbide for cutting tools |
у8A-2 | Russia | Carbide for cutting tools | |
у8A-2 | Russia | Carbide for cutting tools | |
у8A-3 | ГОСТ | Russia | Carbide for cutting tools |
у8A-3 | ГОСТ | Russia | Carbide for cutting tools |
у8г-1 | Russia | Carbide for cutting tools | |
у8г-1 | Russia | Carbide for cutting tools | |
у8г-3 | ГОСТ | Russia | Carbide for cutting tools |
у8г-3 | ГОСТ | Russia | Carbide for cutting tools |
у8гA-1 | ГОСТ | Russia | Carbide for cutting tools |
у8гA-1 | ГОСТ | Russia | Carbide for cutting tools |
у8гA-2 | ГОСТ | Russia | Carbide for cutting tools |
у8гA-2 | ГОСТ | Russia | Carbide for cutting tools |
у8гA-3 | ГОСТ | Russia | Carbide for cutting tools |
у8гA-3 | ГОСТ | Russia | Carbide for cutting tools |
у9-1 | ГОСТ | Russia | Carbide for cutting tools |
у9-1 | ГОСТ | Russia | Carbide for cutting tools |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
REQUEST FOR QUOTATION