Alloy 52 High Alloy and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Category | Type | Steel Grade | Standard | Country | Application |
---|---|---|---|---|---|
Steel Grades | High Alloy | Alloy 52 | |||
AL 425 mod |
|||||
AL 433 |
|||||
AL 436S |
|||||
AL 441 |
|||||
AL 441HP |
|||||
AL-6X |
|||||
AL-6XN |
|||||
Allcorr |
|||||
Alloy 31 |
|||||
Alloy 33 |
C ≤ |
Si ≤ |
Mn ≤ |
P ≤ |
S ≤ |
Cr | Ni |
---|---|---|---|---|---|---|
0.05 | 0.30 | 0.60 | 0.025 | 0.025 | ≤0.25 | 50.50 |
Mo | Al | Cu | Nb | Ti | V | Ce |
≤0.10 | ||||||
N | Co | Pb | B | Other | ||
≤0.50 | Fe... | |||||
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
892 (≥) | 379 (≥) | 23 | 31 | 31 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 441 |
Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
---|---|---|---|---|---|---|---|
33 | - | - | 0.11 | - | |||
378 | 788 | - | 34.3 | 412 | - | ||
715 | - | 34 | 43.2 | 424 | 413 |
Heat treated : 1726°C - 1973°C
Grade | Standard | Country | Application |
---|---|---|---|
Vicalloy | AISI | USA | Martensitic special steel |
Alloy 52 | SAE | USA | Alloy 52 is a 50.50% nickel-iron alloy developed for glass-to-metal seals for some of the soft glasses and some ceramics. The alloy’s rate of thermal expansion is virtually constant to a temperature of about 1050°F (565°C). |
Alloy 713C | ASTM | USA | HIGH-TEMPERATURE HIGH-STRENGTH NICKEL BASE ALLOYS,CAST ALLOYS |
Alloy 713LC | ASTM | USA | HIGH-TEMPERATURE HIGH-STRENGTH NICKEL BASE ALLOYS,CAST ALLOYS |
M52 | ASTM | USA | The middle of high-speed tool steel |
T11352 | UNS | USA | The middle of high-speed tool steel |
1.1525 | DIN | Germany | Carbon tool steel |
1.1520 | DIN | Germany | Carbon tool steel |
1.2552 | DIN | Germany | Cold working alloy tool steel |
SKH52 | JIS | Japan | W-phase system high-speed tool steel |
SS14:2752 | SS | Sweden | Carbide for cutting tools |
SS14:2752 | SS | Sweden | Carbide for cutting tools |
UNS K64152 | UNS | USA | precipitation hardening |
UNS K64152 | UNS | USA | precipitation hardening |
AISI 652 | AISI | USA | precipitation hardening |
UNS N07252 | UNS | USA | precipitation hardening |
WL52 | AISI | USA | Martensitic special steel |
W-Nr 1.4521 | DIN | Germany | Stainless steel |
W-Nr 1.4529 | DIN | Germany | Stainless steel |
2.4952 | DIN | Germany | The high-temperature and high-strength steel |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com