ST40E Tool Steel and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Category | Type | Steel Grade | Standard | Country | Application |
---|---|---|---|---|---|
Steel Grades | Tool Steel | ST40E | |||
G8 |
|||||
G10E |
|||||
H1 |
|||||
H2 |
|||||
H3 |
|||||
ST10E |
|||||
ST15E |
|||||
ST20E |
|||||
ST25E |
|||||
ST30E |
WC ≤ |
Si ≤ |
Mn ≤ |
P ≤ |
S ≤ |
Cr | Co+Ni |
---|---|---|---|---|---|---|
77 | 11.5 | |||||
Mo | Al | Cu | Nb | TiC+TaC(NbC) | V | Ce |
11.5 | ||||||
N | Co | Pb | B | Other | ||
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
853 (≥) | 919 (≥) | 32 | 12 | 31 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 431 |
Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
---|---|---|---|---|---|---|---|
23 | - | - | 0.21 | - | |||
277 | 413 | - | 41.3 | 431 | - | ||
978 | - | 21 | 14.2 | 334 | 441 |
Heat treated : 1928°C - 1824°C
Grade | Standard | Country | Application |
---|---|---|---|
ST40E | JIS | Japan | Carbide for cutting tools |
ST40E | JIS | Japan | Carbide for cutting tools |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com