USA ASTM S6 Alloy tool steel and S6 Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Category | Type | Steel Grade | Standard | Country | Application |
---|---|---|---|---|---|
Steel Grades | Tool Steel And Hard Alloy | S6 | ASTM | USA | Alloy tool steel |
T31507 |
|||||
S1 |
|||||
ASTM A182 F55 |
|||||
T41901 |
|||||
S2 |
|||||
T41902 |
|||||
S4 |
|||||
T41904 |
|||||
S5 |
|||||
T41905 |
C(%) | Si(%) | Mn(%) | P(%) | S(%) | Cr(%) | Mo(%) | V(%) |
---|---|---|---|---|---|---|---|
0.40~0.50 | 2.00~2.50 | 1.20~1.50 | ≤0.030 | ≤0.030 | 1.20~1.50 | 0.30~0.50 | 0.20~0.40 |
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
718 (≥) | 487 (≥) | 43 | 21 | 14 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 132 |
Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
---|---|---|---|---|---|---|---|
21 | - | - | 0.23 | - | |||
922 | 427 | - | 12.3 | 143 | - | ||
238 | - | 33 | 41.2 | 222 | 331 |
Heat treated : 1581°C - 1276°C
Grade | Standard | Country | Application |
---|---|---|---|
S6 | ASTM | USA | Alloy tool steel |
S6-5-2-5 | DIN | Germany | High-speed tool steel |
S6-5-2-5S | DIN | Germany | High-speed tool steel |
S6-5-2S | DIN | Germany | High-speed tool steel |
S6-5-2(2) | DIN | Germany | High-speed tool steel |
S6-5-2 | DIN | Germany | High-speed tool steel |
S6-5-3 | DIN | Germany | High-speed tool steel |
HS6-5-4-2 | AFNOR | France | Carbide for cutting tools |
HS6-5-4-2 | AFNOR | France | Carbide for cutting tools |
HS6-5-2 | AFNOR | France | Carbide for cutting tools |
HS6-5-2 | AFNOR | France | Carbide for cutting tools |
HS6-5-2HC | AFNOR | France | Carbide for cutting tools |
HS6-5-2HC | AFNOR | France | Carbide for cutting tools |
HS6-5-4 | AFNOR | France | Carbide for cutting tools |
HS6-5-4 | AFNOR | France | Carbide for cutting tools |
HS6-5-2-5HC | AFNOR | France | Carbide for cutting tools |
HS6-5-2-5HC | AFNOR | France | Carbide for cutting tools |
HS6-5-2-5HC | AFNOR | France | Carbide for cutting tools |
HS6-5-2-5HC | AFNOR | France | Carbide for cutting tools |
TG1 | AFNOR | France | Carbide for cutting tools |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com