Sweden SS H5 Carbide for cutting tools and H5 Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Category | Type | Steel Grade | Standard | Country | Application |
---|---|---|---|---|---|
Steel Grades | Tool Steel And Hard Alloy | H5 | SS | Sweden | Carbide for cutting tools |
B2 |
|||||
B23 |
|||||
B23 |
|||||
B45 |
|||||
B45 |
|||||
G4 |
|||||
G4 |
|||||
G27 |
|||||
G27 |
|||||
H5 |
Co(%) |
---|
16 |
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
498 (≥) | 363 (≥) | 24 | 11 | 34 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 141 |
Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
---|---|---|---|---|---|---|---|
22 | - | - | 0.34 | - | |||
198 | 468 | - | 21.3 | 111 | - | ||
414 | - | 33 | 42.2 | 433 | 221 |
Heat treated : 1419°C - 1448°C
Grade | Standard | Country | Application |
---|---|---|---|
SKH50 | JIS | Japan | W-phase system high-speed tool steel |
SKH51 | JIS | Japan | W-phase system high-speed tool steel |
SKH52 | JIS | Japan | W-phase system high-speed tool steel |
SKH53 | JIS | Japan | W-phase system high-speed tool steel |
SKH54 | JIS | Japan | W-phase system high-speed tool steel |
SKH55 | JIS | Japan | W-phase system high-speed tool steel |
SKH56 | JIS | Japan | W-phase system high-speed tool steel |
SKH57 | JIS | Japan | W-phase system high-speed tool steel |
SKH58 | JIS | Japan | W-phase system high-speed tool steel |
SKH59 | JIS | Japan | W-phase system high-speed tool steel |
H5 | SS | Sweden | Carbide for cutting tools |
H5 | SS | Sweden | Carbide for cutting tools |
SKH53 | CNS | China | Carbide for cutting tools |
SKC3② | CNS | China | Carbide for cutting tools |
SKC3② | CNS | China | Carbide for cutting tools |
UNS H51500 | UNS | USA | precipitation hardening |
08X17H5M3 | Austenitic - Martensitic steel | ||
12X21H5T | Austenitic - Martensitic steel | ||
07X12Γ7AH5 | ГОСТ | Russia | Austenitic |
ISO H5 | ISO | ISO | ISO standard iron grain size heat resistant steel |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com