Uranus 50 High Alloy and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Category | Type | Steel Grade | Standard | Country | Application |
---|---|---|---|---|---|
Steel Grades | High Alloy | Uranus 50 | |||
Udimet 710 |
|||||
UMCo-50 |
|||||
UMCo-51 |
|||||
Unimach 180 |
|||||
Unitemp 670M |
|||||
Unitemp 718 |
|||||
Unitemp 750 |
|||||
Unitemp 1753 |
|||||
Unitemp AF2-1D/A |
|||||
Unitemp HS |
C ≤ |
Si ≤ |
Mn ≤ |
P ≤ |
S ≤ |
Cr | Ni |
---|---|---|---|---|---|---|
0.04 | 1 | 2 | 0.03 | 0.01 | 20.5-22.5 | 5.5-8.5 |
Mo | Al | Cu | Nb | Ti | V | Ce |
2-3 | 1-2 | |||||
N | Co | Pb | B | Other | ||
≤0.2 | ||||||
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
341 (≥) | 477 (≥) | 44 | 34 | 22 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 311 |
Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
---|---|---|---|---|---|---|---|
21 | - | - | 0.42 | - | |||
186 | 241 | - | 34.3 | 211 | - | ||
544 | - | 34 | 43.2 | 431 | 211 |
Heat treated : 1924°C - 1981°C
Grade | Standard | Country | Application |
---|---|---|---|
Uranus50 | UNS | USA | Dual-phase steel |
Uranus50 | UNS | USA | Dual-phase steel |
UNS G10050 | UNS | USA | General use carbon steel bar |
UNS G10150 | UNS | USA | General use carbon steel bar |
T31501 | UNS | USA | Alloy tool steel |
T31506 | UNS | USA | Alloy tool steel |
T31507 | UNS | USA | Alloy tool steel |
M50 | ASTM | USA | The middle of high-speed tool steel |
T11350 | UNS | USA | The middle of high-speed tool steel |
HAP 50 | AISI | USA | Powder metallurgy high-speed tool steel |
C-50 | AISI | USA | Machining with carbide |
Stellite 250 | Stellite alloy | ||
Stellite 506 | USA | Stellite alloy | |
1.1750 | DIN | Germany | Carbon tool steel |
1.2550 | DIN | Germany | Cold working alloy tool steel |
X50CrMoW9-1-1 | DIN | Germany | Cold working alloy tool steel |
50NiCr13 | DIN | Germany | Cold working alloy tool steel |
X50CrMoV5-1 | DIN | Germany | Hot working alloy tool steel |
50CrMoV13-14 | DIN | Germany | Hot working alloy tool steel |
X50NiCrWV13-13 | DIN | Germany | Hot working alloy tool steel |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com