Udimet 710 High Alloy and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Category | Type | Steel Grade | Standard | Country | Application |
---|---|---|---|---|---|
Steel Grades | High Alloy | Udimet 710 | |||
TrimRite |
|||||
TRW V1A |
|||||
TRW-1900 |
|||||
UCX 2 |
|||||
Udimet 500 |
|||||
Udimet 520 |
|||||
Udimet 630 |
|||||
Udimet 700 |
|||||
Udimet 720 |
|||||
Udimet alloy |
C ≤ |
Si ≤ |
Mn ≤ |
P ≤ |
S ≤ |
Cr | Ni |
---|---|---|---|---|---|---|
0.07 | 18 | 55 | ||||
Mo | Al | Cu | Nb | Ti | W | Fe |
3 | 2.5 | 5 | 1.5 | 0.5 | ||
N | Co | Pb | B | Other | ||
15 | 0.02 | |||||
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
315 (≥) | 444 (≥) | 13 | 33 | 34 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 432 |
Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
---|---|---|---|---|---|---|---|
42 | - | - | 0.22 | - | |||
876 | 926 | - | 41.3 | 334 | - | ||
415 | - | 31 | 31.2 | 212 | 323 |
Heat treated : 1712°C - 1372°C
Grade | Standard | Country | Application |
---|---|---|---|
1.2710 | DIN | Germany | Cold working alloy tool steel |
SS14:2710 | SS | Sweden | Carbide for cutting tools |
SS14:2710 | SS | Sweden | Carbide for cutting tools |
UNS J92710 | AISI | USA | |
UNS J92710 | AISI | USA | |
419710 | The Czech republic tool steel | ||
417102 | The Czech republic Stainless steel | ||
GH4710 | China | Nickel base superalloy | |
GH4710 | China | wrought Fe/Ni-base superalloy | |
GH710 | China | wrought Fe/Ni-base superalloy | |
J92710 | UNS | USA | Steel Castings, Iron-Chromium and Iron-Chromium-Nickel,Heat Resistant, for General Application |
J92710 | UNS | USA | Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service |
J92710 | UNS | USA | Steel Castings, Iron-Chromium and Iron-Chromium-Nickel,Heat Resistant, for General Application |
J92710 | UNS | USA | Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com