Unimach 180 High Alloy and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Category | Type | Steel Grade | Standard | Country | Application |
---|---|---|---|---|---|
Steel Grades | High Alloy | Unimach 180 | |||
UCX 2 |
|||||
Udimet 500 |
|||||
Udimet 520 |
|||||
Udimet 630 |
|||||
Udimet 700 |
|||||
Udimet 720 |
|||||
Udimet alloy |
|||||
Udimet 710 |
|||||
UMCo-50 |
|||||
UMCo-51 |
C ≤ |
Si ≤ |
Mn ≤ |
P ≤ |
S ≤ |
Cr | Ni |
---|---|---|---|---|---|---|
0.13 | 2 | 10 | ||||
Mo | Al | Cu | Nb | Ti | V | Fe |
1 | ... | |||||
N | Co | Pb | B | Other | ||
8 | ||||||
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
326 (≥) | 829 (≥) | 43 | 23 | 11 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 112 |
Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
---|---|---|---|---|---|---|---|
44 | - | - | 0.32 | - | |||
315 | 738 | - | 31.3 | 424 | - | ||
597 | - | 13 | 11.2 | 212 | 143 |
Heat treated : 1983°C - 1719°C
Grade | Standard | Country | Application |
---|---|---|---|
UNS G10180 | UNS | USA | General use carbon steel bar |
S31803 | UNS | USA | Dual-phase steel |
S31803 | UNS | USA | Dual-phase steel |
S41800 | UNS | USA | Martensitic special steel |
S41800 | UNS | USA | Martensitic special steel |
UNS S41800 | UNS | USA | precipitation hardening |
UNS S41800 | UNS | USA | precipitation hardening |
2TiMoCr180 | Stainless steel | ||
5NiCr180 | Stainless steel | ||
10NC180 | Stainless steel | ||
10TiNiCr180 | Stainless steel | ||
12NNiMnCr180 | Stainless steel | ||
90VMoCr180 | Stainless steel | ||
411800 | The Czech republic Structural steel | ||
413180 | The Czech republic Structural steel | ||
11800 | The Czech republic Structural steel | ||
13180 | The Czech republic Structural steel | ||
SBPR930/1180 | China | China Taiwan Structural steel | |
EN X1SCrNiMn180SKE | EN | Euronorm Stainless Steel | |
GH4180 | China | Nickel base superalloy |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com