SM 2550 High Alloy and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Category | Type | Steel Grade | Standard | Country | Application |
---|---|---|---|---|---|
Steel Grades | High Alloy | SM 2550 | |||
SC-1 |
|||||
SCF-19 |
|||||
SCF 23 (Sea Fast) |
|||||
SEL |
|||||
SEL-15 |
|||||
Silver Fox 100 |
|||||
SPI 040 |
|||||
SPI 126 |
|||||
SM 2035 |
|||||
SM 2050 |
C ≤ |
Si ≤ |
Mn ≤ |
P ≤ |
S ≤ |
Cr | Ni |
---|---|---|---|---|---|---|
0.03 | 1 | 1 | 0.03 | 0.03 | 23-26 | 47-52 |
Mo | Al | Cu | Nb | Ti | V | Fe |
6-9 | ≤1.2 | ≤0.69 | ... | |||
N | Co | Pb | B | Other | ||
W ≤3 | ||||||
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
881 (≥) | 113 (≥) | 11 | 12 | 44 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 124 |
Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
---|---|---|---|---|---|---|---|
14 | - | - | 0.44 | - | |||
731 | 566 | - | 34.3 | 333 | - | ||
352 | - | 23 | 44.2 | 332 | 144 |
Heat treated : 1125°C - 1927°C
Grade | Standard | Country | Application |
---|---|---|---|
SM45 | China | Plastic mould with flat steel | |
SM50 | China | Plastic mould with flat steel | |
SM55 | China | Plastic mould with flat steel | |
SM1CrNi3 | China | Plastic mould with flat steel | |
SM3Cr2Mo | China | Plastic mould with flat steel | |
SM3Cr2Ni1Mo | China | Plastic mould with flat steel | |
SM2CrNi3MoAl1S | China | Plastic mould with flat steel | |
SM4Cr5MoSiV | China | Plastic mould with flat steel | |
SM4Cr5MoSiV1 | China | Plastic mould with flat steel | |
SMCr12Mo1V1 | China | Plastic mould with flat steel | |
SM2Cr13 | China | Plastic mould with flat steel | |
SM3Cr17Mo | China | Plastic mould with flat steel | |
SM4Cr13 | China | Plastic mould with flat steel | |
SM45A | China | Plastic mould with Hot-rolled steel plate | |
SM48 | China | Plastic mould with Hot-rolled steel plate | |
SM | SS | Sweden | Carbide for cutting tools |
SM | SS | Sweden | Carbide for cutting tools |
CF-10SMnN | AISI | USA | |
ASTM CF10SMnN | AISI | USA | |
3SMnSi13S | Alloy structural steel |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com