HAYNES alloy 150 High Alloy and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Category | Type | Steel Grade | Standard | Country | Application |
---|---|---|---|---|---|
Steel Grades | High Alloy | HAYNES alloy 150 | |||
HASTELLOY alloy G50 |
|||||
HASTELLOY alloy H9M |
|||||
HASTELLOY alloy N |
|||||
HASTELLOY alloy S |
|||||
HASTELLOY alloy W |
|||||
HASTELLOY alloy X |
|||||
HAYNES alloy 6B |
|||||
HAYNES 20 Mod |
|||||
HAYNES alloy 36 |
|||||
HAYNES alloy 56 |
C ≤ |
Si ≤ |
Mn ≤ |
P ≤ |
S ≤ |
Cr | Ni |
---|---|---|---|---|---|---|
0.05 | 1 | 1 | 28 | |||
Mo | Al | Cu | Nb | Ti | V | Ce |
N | Co | Pb | B | Other | ||
... | Fe 21 | |||||
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
759 (≥) | 344 (≥) | 41 | 11 | 42 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 244 |
Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
---|---|---|---|---|---|---|---|
44 | - | - | 0.31 | - | |||
228 | 853 | - | 12.3 | 221 | - | ||
816 | - | 32 | 22.2 | 111 | 332 |
Heat treated : 1947°C - 1326°C
Grade | Standard | Country | Application |
---|---|---|---|
Vicalloy | AISI | USA | Martensitic special steel |
Alloy 52 | SAE | USA | Alloy 52 is a 50.50% nickel-iron alloy developed for glass-to-metal seals for some of the soft glasses and some ceramics. The alloy’s rate of thermal expansion is virtually constant to a temperature of about 1050°F (565°C). |
Alloy 713C | ASTM | USA | HIGH-TEMPERATURE HIGH-STRENGTH NICKEL BASE ALLOYS,CAST ALLOYS |
Alloy 713LC | ASTM | USA | HIGH-TEMPERATURE HIGH-STRENGTH NICKEL BASE ALLOYS,CAST ALLOYS |
UNS G10150 | UNS | USA | General use carbon steel bar |
T31501 | UNS | USA | Alloy tool steel |
T31506 | UNS | USA | Alloy tool steel |
T31507 | UNS | USA | Alloy tool steel |
S31500 | UNS | USA | Dual-phase steel |
S31500 | UNS | USA | Dual-phase steel |
S41500 | UNS | USA | Martensitic special steel |
S41500 | UNS | USA | Martensitic special steel |
UNS H51500 | UNS | USA | precipitation hardening |
SAE NV6(5150) | SAE | USA | precipitation hardening |
UNS J91150 | AISI | USA | |
UNS J41500 | AISI | USA | |
UNS J31500 | AISI | China | |
UNS J41501 | AISI | China | |
ICI 6150 | AISI | USA | |
T150280 | Cast Steel |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com