USA AISI ICI 6150 and ICI 6150 Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Category | Type | Steel Grade | Standard | Country | Application |
---|---|---|---|---|---|
Steel Grades | Special Alloy | ICI 6150 | AISI | USA | |
ICI 4130 |
|||||
ICI 4140 |
|||||
ASTM 8Q |
|||||
ICI 4330 |
|||||
ASTM 9Q |
|||||
ASTM 10Q |
|||||
ICI 4340 |
|||||
ASTM 11Q |
|||||
ICI 4620 |
|||||
ASTM 12Q |
C(%) | Si(%) | Mn(%) | P(%) | S(%) | Cr(%) | Ni(%) | W(%) | Cu(%) |
---|---|---|---|---|---|---|---|---|
0.45-0.55 | 0.20-0.80 | 0.65-0.95 | Max 0.04 | Max 0.045 | 0.80-1.10 | Max 0.50 | Max 0.10 | Max 0.50 |
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
477 (≥) | 327 (≥) | 32 | 43 | 41 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 232 |
Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
---|---|---|---|---|---|---|---|
22 | - | - | 0.23 | - | |||
137 | 456 | - | 33.3 | 334 | - | ||
126 | - | 23 | 33.2 | 323 | 122 |
Heat treated : 1733°C - 1818°C
Grade | Standard | Country | Application |
---|---|---|---|
ICI 1020 | AISI | USA | |
ICI 1030 | AISI | USA | |
ICI 1040 | AISI | USA | |
ICI 1050 | AISI | USA | |
ICI 6120 | AISI | USA | |
ICI 4020 | AISI | USA | |
ICI 4130 | AISI | USA | |
ICI 4140 | AISI | USA | |
ICI 4330 | AISI | USA | |
ICI 4340 | AISI | USA | |
ICI 4620 | AISI | USA | |
ICI 6150 | AISI | USA | |
ICI 8620 | AISI | USA | |
ICI 8630 | AISI | USA | |
ICI 52100 | AISI | USA | |
OTA10TiMoNiCil70 | STAS/SR | Romania | Cast Steel |
6150 | AS | Australia | Australia Structural steel |
6150 | ICI | USA | Carbon and Low Alloy Steel for General Application, and Cobalt Alloy for High Strength at Elevated Temperatures |
6150 | ICI | USA | Carbon and Low Alloy Steel for General Application, and Cobalt Alloy for High Strength at Elevated Temperatures |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com