HAYNES alloy 56 High Alloy and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Category | Type | Steel Grade | Standard | Country | Application |
---|---|---|---|---|---|
Steel Grades | High Alloy | HAYNES alloy 56 | |||
HASTELLOY alloy G30 |
|||||
HASTELLOY alloy G50 |
|||||
HASTELLOY alloy H9M |
|||||
HASTELLOY alloy N |
|||||
HASTELLOY alloy S |
|||||
HASTELLOY alloy W |
|||||
HASTELLOY alloy X |
|||||
HAYNES alloy 6B |
|||||
HAYNES 20 Mod |
|||||
HAYNES alloy 36 |
C ≤ |
Si ≤ |
Mn ≤ |
P ≤ |
S ≤ |
Cr | Ni |
---|---|---|---|---|---|---|
0.25 | 0.5 | 1.2 | 20 | 13 | ||
Mo | Al | Cu | Nb | Ti | V | Ce |
4.5 | 1 | |||||
N | Co | Pb | B | Other | ||
11 |
W 1.0 Fe... |
|||||
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
434 (≥) | 234 (≥) | 41 | 33 | 33 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 314 |
Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
---|---|---|---|---|---|---|---|
11 | - | - | 0.12 | - | |||
964 | 337 | - | 12.3 | 232 | - | ||
669 | - | 32 | 43.2 | 232 | 311 |
Heat treated : 1343°C - 1452°C
Grade | Standard | Country | Application |
---|---|---|---|
Vicalloy | AISI | USA | Martensitic special steel |
Alloy 52 | SAE | USA | Alloy 52 is a 50.50% nickel-iron alloy developed for glass-to-metal seals for some of the soft glasses and some ceramics. The alloy’s rate of thermal expansion is virtually constant to a temperature of about 1050°F (565°C). |
Alloy 713C | ASTM | USA | HIGH-TEMPERATURE HIGH-STRENGTH NICKEL BASE ALLOYS,CAST ALLOYS |
Alloy 713LC | ASTM | USA | HIGH-TEMPERATURE HIGH-STRENGTH NICKEL BASE ALLOYS,CAST ALLOYS |
Stellite 156 | Stellite alloy | ||
1.1563 | DIN | Germany | Carbon tool steel |
1.2056 | DIN | Germany | Cold working alloy tool steel |
1.2562 | DIN | Germany | Cold working alloy tool steel |
1.2564 | DIN | Germany | Hot working alloy tool steel |
1.2567 | DIN | Germany | Hot working alloy tool steel |
56NiCrMoV7 | DIN | Germany | Hot working alloy tool steel |
SKH56 | JIS | Japan | W-phase system high-speed tool steel |
E256 | Carbide for cutting tools | ||
E256 | Carbide for cutting tools | ||
X56CrMoWV4 | AFNOR | France | Carbide for cutting tools |
X56CrMoWV4 | AFNOR | France | Carbide for cutting tools |
SS14:2756① | SS | Sweden | Carbide for cutting tools |
SS14:2756① | SS | Sweden | Carbide for cutting tools |
W-Nr 1.4563 | DIN | Germany | Stainless steel |
W-Nr 1.4565 | DIN | Germany | Stainless steel |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com