HASTELLOY alloy C4 High Alloy and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Category | Type | Steel Grade | Standard | Country | Application |
---|---|---|---|---|---|
Steel Grades | High Alloy | HASTELLOY alloy C4 | |||
GMR-235D |
|||||
Greek Ascoloy |
|||||
H-11 |
|||||
H-40 |
|||||
H-46 |
|||||
H-53 |
|||||
HASTELLOY alloy B |
|||||
HASTELLOY alloy B2 |
|||||
HASTELLOY alloy B3 |
|||||
HASTELLOY alloy C |
C ≤ |
Si ≤ |
Mn ≤ |
P ≤ |
S ≤ |
Cr | Ni |
---|---|---|---|---|---|---|
0.15 | 0.08 | 1 | 14-18 | ... | ||
Mo | Al | Cu | Nb | Ti | V | Ce |
14-17 | ≤0.7 | |||||
N | Co | Pb | B | Other | ||
≤2.0 | Fe≤3.0 | |||||
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
312 (≥) | 958 (≥) | 12 | 43 | 33 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 424 |
Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
---|---|---|---|---|---|---|---|
24 | - | - | 0.11 | - | |||
123 | 518 | - | 21.3 | 443 | - | ||
265 | - | 32 | 24.2 | 313 | 211 |
Heat treated : 1957°C - 1228°C
Grade | Standard | Country | Application |
---|---|---|---|
Vicalloy | AISI | USA | Martensitic special steel |
Alloy 52 | SAE | USA | Alloy 52 is a 50.50% nickel-iron alloy developed for glass-to-metal seals for some of the soft glasses and some ceramics. The alloy’s rate of thermal expansion is virtually constant to a temperature of about 1050°F (565°C). |
Alloy 713C | ASTM | USA | HIGH-TEMPERATURE HIGH-STRENGTH NICKEL BASE ALLOYS,CAST ALLOYS |
Alloy 713LC | ASTM | USA | HIGH-TEMPERATURE HIGH-STRENGTH NICKEL BASE ALLOYS,CAST ALLOYS |
C45W | DIN | Germany | Carbon tool steel |
59CrC4 | DIN | Germany | Cold working alloy tool steel |
STC4 | Carbide for cutting tools | ||
STC4 | Carbide for cutting tools | ||
C45U | Carbide for cutting tools | ||
C45U | Carbide for cutting tools | ||
C45E | AFNOR | France | Fasteners with stainless steel and nickel alloy for high temperature and low temperature(NF-EN 10269(1999)) |
15X18H12C4TЮ | Austenitic - Martensitic steel | ||
ASTM WC4 | AISI | USA | |
ASTM LC4 | AISI | USA | |
OLC40 | Structural steel | ||
OLC40S | Structural steel | ||
OLC40X | Structural steel | ||
OLC40XS | Structural steel | ||
OLC45 | Structural steel | ||
OLC45S | Structural steel |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com