HASTELLOY alloy B3 High Alloy and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Category | Type | Steel Grade | Standard | Country | Application |
---|---|---|---|---|---|
Steel Grades | High Alloy | HASTELLOY alloy B3 | |||
G -192 |
|||||
GMR-235 |
|||||
GMR-235D |
|||||
Greek Ascoloy |
|||||
H-11 |
|||||
H-40 |
|||||
H-46 |
|||||
H-53 |
|||||
HASTELLOY alloy B |
|||||
HASTELLOY alloy B2 |
C ≤ |
Si ≤ |
Mn ≤ |
P ≤ |
S ≤ |
Cr | Ni |
---|---|---|---|---|---|---|
0.01 | 0.1 | 3 | 0.03 | 0.01 | 1-3 | ≥65 |
Mo | Al | Cu | Nb | Ti | V | Ce |
27-32 | ≤0.5 | ≤0.2 | ≤0.2 | ≤0.2 | ||
N | Co | Pb | B | Other | ||
≤3 |
Ta≤0.2 Zr≤0.1 Ni+Mo 94~98 |
W≤3 Nb/Ta≤0.2 |
||||
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
298 (≥) | 256 (≥) | 41 | 22 | 41 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 143 |
Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
---|---|---|---|---|---|---|---|
11 | - | - | 0.24 | - | |||
627 | 731 | - | 34.3 | 434 | - | ||
523 | - | 11 | 32.2 | 342 | 443 |
Heat treated : 1589°C - 1233°C
Grade | Standard | Country | Application |
---|---|---|---|
Vicalloy | AISI | USA | Martensitic special steel |
Alloy 52 | SAE | USA | Alloy 52 is a 50.50% nickel-iron alloy developed for glass-to-metal seals for some of the soft glasses and some ceramics. The alloy’s rate of thermal expansion is virtually constant to a temperature of about 1050°F (565°C). |
Alloy 713C | ASTM | USA | HIGH-TEMPERATURE HIGH-STRENGTH NICKEL BASE ALLOYS,CAST ALLOYS |
Alloy 713LC | ASTM | USA | HIGH-TEMPERATURE HIGH-STRENGTH NICKEL BASE ALLOYS,CAST ALLOYS |
ASTM B3N,B3Q | AISI | USA | |
11SMnPb30 | Spain structural alloy steel | ||
11SMnPb37 | Spain structural alloy steel | ||
86B30H | Australia Structural steel | ||
EN Fe37B3FU | EN | Euronorm Structural steel | |
EN Fc37B3FN | EN | Euronorm Structural steel | |
EN FM2B3FU | EN | Euronorm Structural steel | |
EN Fe42B3FN | EN | Euronorm Structural steel | |
EN 11SMnPb30 | EN | Euronorm Structural steel | |
EN 11SMnPb37 | EN | Euronorm Structural steel | |
B3N,B3Q | ASTM | USA | Steel Castings, Ferritic and Martensitic, for Pressure-Containing and Other Applications, for Low-Temperature Service |
B3N,B3Q | ASTM | USA | Steel Castings, Ferritic and Martensitic, for Pressure-Containing and Other Applications, for Low-Temperature Service |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com