Welten 50 Carbon Steel and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Category | Type | Steel Grade | Standard | Country | Application |
---|---|---|---|---|---|
Steel Grades | Carbon Steel | Welten 50 | |||
FI-YAW-TEN |
|||||
HTP-52W |
|||||
NK-HITEN 50 |
|||||
NK-HITEN 60 |
|||||
NK-HITEN 70 |
|||||
NK-HITEN 80 |
|||||
NK-HITEN 100 |
|||||
River Ace 60 |
|||||
River Ace 70 |
|||||
River Ace 80 |
C ≤ |
Si ≤ |
Mn ≤ |
P ≤ |
S ≤ |
Cr | Ni |
---|---|---|---|---|---|---|
0.18 | 0.25-0.45 | 0.9-1.3 | ||||
Mo | Al | Cu | Nb | Ti | V | Ce |
N | Co | Pb | B | Other | ||
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
851 (≥) | 144 (≥) | 12 | 12 | 14 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 243 |
Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
---|---|---|---|---|---|---|---|
21 | - | - | 0.13 | - | |||
293 | 418 | - | 43.3 | 333 | - | ||
796 | - | 24 | 34.2 | 213 | 433 |
Heat treated : 1325°C - 1184°C
Grade | Standard | Country | Application |
---|---|---|---|
UNS G10050 | UNS | USA | General use carbon steel bar |
UNS G10150 | UNS | USA | General use carbon steel bar |
T31501 | UNS | USA | Alloy tool steel |
T31506 | UNS | USA | Alloy tool steel |
T31507 | UNS | USA | Alloy tool steel |
M50 | ASTM | USA | The middle of high-speed tool steel |
T11350 | UNS | USA | The middle of high-speed tool steel |
HAP 50 | AISI | USA | Powder metallurgy high-speed tool steel |
C-50 | AISI | USA | Machining with carbide |
Stellite 250 | Stellite alloy | ||
Stellite 506 | USA | Stellite alloy | |
1.1750 | DIN | Germany | Carbon tool steel |
1.2550 | DIN | Germany | Cold working alloy tool steel |
X50CrMoW9-1-1 | DIN | Germany | Cold working alloy tool steel |
50NiCr13 | DIN | Germany | Cold working alloy tool steel |
X50CrMoV5-1 | DIN | Germany | Hot working alloy tool steel |
50CrMoV13-14 | DIN | Germany | Hot working alloy tool steel |
X50NiCrWV13-13 | DIN | Germany | Hot working alloy tool steel |
SKH50 | JIS | Japan | W-phase system high-speed tool steel |
X50P | Carbide for cutting tools |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com