NK-HITEN 100 Carbon Steel and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Category | Type | Steel Grade | Standard | Country | Application |
---|---|---|---|---|---|
Steel Grades | Carbon Steel | NK-HITEN 100 | |||
FTW-60 |
|||||
FTW-70 |
|||||
FI-Z |
|||||
FI-Z Super |
|||||
FI-YAW-TEN |
|||||
HTP-52W |
|||||
NK-HITEN 50 |
|||||
NK-HITEN 60 |
|||||
NK-HITEN 70 |
|||||
NK-HITEN 80 |
C ≤ |
Si ≤ |
Mn ≤ |
P ≤ |
S ≤ |
Cr | Ni |
---|---|---|---|---|---|---|
0.18 | 0.15-0.35 | 1.0 | 0.8 | 1.0 | ||
Mo | Al | Cu | Nb | Ti | V | Ce |
0.6 | 0.15-0.5 | 0.1 | ||||
N | Co | Pb | B | Other | ||
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
343 (≥) | 195 (≥) | 44 | 43 | 34 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 313 |
Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
---|---|---|---|---|---|---|---|
24 | - | - | 0.12 | - | |||
671 | 924 | - | 11.3 | 414 | - | ||
923 | - | 11 | 41.2 | 242 | 312 |
Heat treated : 1911°C - 1987°C
Grade | Standard | Country | Application |
---|---|---|---|
ASTM 1005 | ASTM | USA | General use carbon steel bar |
UNS G10050 | UNS | USA | General use carbon steel bar |
ASTM 1006 | ASTM | USA | General use carbon steel bar |
UNS G10060 | UNS | USA | General use carbon steel bar |
ASTM 1008 | ASTM | USA | General use carbon steel bar |
UNS G10080 | UNS | USA | General use carbon steel bar |
UNS G10100 | UNS | USA | General use carbon steel bar |
100CrMo5 | DIN | Germany | Cold working alloy tool steel |
X100CrMoV5-1 | DIN | Germany | Cold working alloy tool steel |
100MnCrW4 | DIN | Germany | Cold working alloy tool steel |
100V1 | DIN | Germany | Cold working alloy tool steel |
100Cr6 | AFNOR | France | Carbide for cutting tools |
100Cr6 | AFNOR | France | Carbide for cutting tools |
100CrMn6 | AFNOR | France | Carbide for cutting tools |
100CrMn6 | AFNOR | France | Carbide for cutting tools |
X100CrMoV5 | AFNOR | France | Carbide for cutting tools |
X100CrMoV5 | AFNOR | France | Carbide for cutting tools |
X100CrMo17 | AFNOR | France | Carbide for cutting tools |
35CrMo8 | AFNOR | France | Carbide for cutting tools |
35CrMo8 | AFNOR | France | Carbide for cutting tools |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com