River Ace 80 Carbon Steel and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Category | Type | Steel Grade | Standard | Country | Application |
---|---|---|---|---|---|
Steel Grades | Carbon Steel | River Ace 80 | |||
FI-Z Super |
|||||
FI-YAW-TEN |
|||||
HTP-52W |
|||||
NK-HITEN 50 |
|||||
NK-HITEN 60 |
|||||
NK-HITEN 70 |
|||||
NK-HITEN 80 |
|||||
NK-HITEN 100 |
|||||
River Ace 60 |
|||||
River Ace 70 |
C ≤ |
Si ≤ |
Mn ≤ |
P ≤ |
S ≤ |
Cr | Ni |
---|---|---|---|---|---|---|
0.18 | 0.15-0.35 | 1.0 | 0.8 | 1.0 | ||
Mo | Al | Cu | Nb | Ti | V | Ce |
0.6 | 0.5 | 0.08 | ||||
N | Co | Pb | B | Other | ||
0.006 | ||||||
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
924 (≥) | 865 (≥) | 21 | 41 | 14 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 144 |
Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
---|---|---|---|---|---|---|---|
23 | - | - | 0.23 | - | |||
627 | 895 | - | 41.3 | 442 | - | ||
246 | - | 32 | 23.2 | 321 | 344 |
Heat treated : 1484°C - 1812°C
Grade | Standard | Country | Application |
---|---|---|---|
UNS G10080 | UNS | USA | General use carbon steel bar |
UNS G10180 | UNS | USA | General use carbon steel bar |
C80W1 | Germany | Carbon tool steel | |
C80W2 | DIN | Germany | Carbon tool steel |
1.2080 | DIN | Germany | Cold working alloy tool steel |
80CrV2 | DIN | Germany | Cold working alloy tool steel |
80WCrV8 | DIN | Germany | Cold working alloy tool steel |
1.2880 | DIN | Germany | Cold working alloy tool steel |
SK80 | JIS | Japan | Carbon tool steel |
TC80 | JIS | Japan | Carbon tool steel |
AC805 | JIS | Japan | Carbide for cutting tools |
AC805 | JIS | Japan | Carbide for cutting tools |
X80MoCrV42-16 | AFNOR | France | Carbide for cutting tools |
X80MoCrV42-16 | AFNOR | France | Carbide for cutting tools |
SS14:1880 | SS | Sweden | Carbide for cutting tools |
SS14:1880 | SS | Sweden | Carbide for cutting tools |
C80U | Carbide for cutting tools | ||
C80U | Carbide for cutting tools | ||
UNS S42800 | UNS | USA | Martensitic special steel |
AISI S13800 | USA | precipitation hardening |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com