20Cr Carbon Steel and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Category | Type | Steel Grade | Standard | Country | Application |
---|---|---|---|---|---|
Steel Grades | Carbon Steel | 20Cr | |||
25Cr-12Ni |
|||||
ASTM CK-20 |
|||||
25Cr-20Ni |
|||||
ASTM CE-30 |
|||||
29Cr-9Ni |
|||||
ASTM CA-15 |
|||||
12Cr |
|||||
ASTM CA-15M |
|||||
12Cr |
|||||
ASTM CB-30 |
C ≤ |
Si ≤ |
Mn ≤ |
P ≤ |
S ≤ |
Cr | Ni |
---|---|---|---|---|---|---|
0.3 | 1.5 | 1.0 | 0.04 | 0.04 | 18.0-21.0 | ≤2.0 |
Mo | Al | Cu | Nb | Ti | V | Se |
0.9-1.2 | ||||||
N | Co | Pb | B | Other | ||
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
189 (≥) | 296 (≥) | 41 | 43 | 33 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 244 |
Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
---|---|---|---|---|---|---|---|
14 | - | - | 0.23 | - | |||
744 | 746 | - | 21.3 | 223 | - | ||
592 | - | 14 | 12.2 | 321 | 322 |
Heat treated : 1838°C - 1125°C
Grade | Standard | Country | Application |
---|---|---|---|
X220CrVMo12-2 | DIN | Germany | Cold working alloy tool steel |
X20CrMo13 | DIN | Germany | Hot working alloy tool steel |
X20Cr13 | AFNOR | France | Carbide for cutting tools |
X20Cr13 | AFNOR | France | Carbide for cutting tools |
X20Cr13 | AFNOR | France | Carbide for cutting tools |
X20Cr13 | AFNOR | France | Carbide for cutting tools |
X20CrMoWV12-1 | DIN | Germany | The high-temperature and high-strength steel |
X20Cr13(AFNOR) | AFNOR | France | Martensite And Precipitation Hardening |
20CrMnVTiB4-10 | AFNOR | France | Fasteners with stainless steel and nickel alloy for high temperature and low temperature (NF-EN 10269(1999)) |
20Cr | ASTM | USA | |
20Cr-29Ni+Mo+Cu | AISI | USA | |
20Cr-18Ni+Mo+Cu | AISI | USA | |
20Cr-29Ni+Mo+Cu | AISI | USA | |
20Cr-18Ni+Mo+Cu | AISI | USA | |
20Cr-25Ni | AISI | USA | |
ISO X20Cr13 | ISO standard thermal deformation of stainless steel | ||
ISO X20CrMoNiNbV11 1 | High temperature bainite and martensite steel ISO standard internal combustion engine | ||
20Cr25Ni20 | China | Stainless steel bars | |
20Cr13Mn9Ni4 | China | Stainless steel bars | |
20Cr15Mn15Ni2N | China | Stainless steel bars |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com