UK BH10A Carbide for cutting tools and BH10A Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Category | Type | Steel Grade | Standard | Country | Application |
---|---|---|---|---|---|
Steel Grades | Tool Steel And Hard Alloy | BH10A | UK | Carbide for cutting tools | |
BD3 |
|||||
BF1 |
|||||
BF1 |
|||||
BL1 |
|||||
BL1 |
|||||
BL3 |
|||||
BL3 |
|||||
:BH10 |
|||||
:BH10 |
|||||
BH10A |
C(%) | Si(%) | Mn(%) | Cr(%) | Ni(%) | Mo(%) | V(%) | W(%) |
---|---|---|---|---|---|---|---|
0.30-0.40 | 0.75-1.10 | ≤0.40 | 2.80-3.20 | ≤0.40 | 2.65-2.95 | 0.30-1.10 | Cu≤0.20,Sn≤0.05 |
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
667 (≥) | 266 (≥) | 23 | 11 | 42 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 333 |
Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
---|---|---|---|---|---|---|---|
24 | - | - | 0.32 | - | |||
658 | 976 | - | 12.3 | 244 | - | ||
514 | - | 32 | 34.2 | 221 | 133 |
Heat treated : 1986°C - 1798°C
Grade | Standard | Country | Application |
---|---|---|---|
BH10A | UK | Carbide for cutting tools | |
BH10A | UK | Carbide for cutting tools |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com