Chinese
Available 24/7 at contact@steel-grades.com
SGSG
Post Your Request Now
Toggle menu
Hello, Sign inMy Account

1.4435

Favorite Datasheet
X2CrNiMo18-14-3 Z 3 CND 17-11-02
#00Cr17Ni14Mo2 #X2CrNiMo18 #1.4435 #1.4435 #Z3CND17-11-02

Description

Germany AWS DIN 17440 (1996), DIN 17441 (1997), DIN 17455 (1985), DIN 17456 (1985) , DIN 17457 (1985), DIN 17458 (1985), DIN EN 10028-7, DIN EN 10088-1, DIN EN 10088-2, DIN EN 10088-3, DIN EN 10088-4, DIN EN 10088-5, DIN EN 10216-5 (2004) , DIN EN 10217-7, DIN EN 10222-5, DIN EN 10250-4, DIN EN 10253-3, DIN EN 10253-4, DIN EN 10272, DIN EN 10296-2 (2005), DIN EN 10297-2 (2005) , 1.4435 Specialsteel Austenitic stainless steel. Grade 00Cr17Ni14Mo2 was replaced by new designation 022Cr17Ni12Mo2 according to GB/T 20878 (2007) and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.

Datasheet for: Steel Grades:Specialsteel: 1.4435
Category Class Grade Type Standard Country Application
Steel GradesSpecialsteel 1.4435 Austenite AWS Germany Austenitic stainless steel. Grade 00Cr17Ni14Mo2 was replaced by new designation 022Cr17Ni12Mo2 according to GB/T 20878 (2007)

Chemical composition(mass fraction)(wt.%) of the 1.4435

C Si Mn P S Ni Cr Mo
≤0.030 ≤1.00 ≤2.00 ≤0.035 ≤0.030 12.00 -15.00 16.00 -18.00 2.00 -3.00

Mechanical Properties of steel grade 1.4435

Yield
Rp0.2 (MPa)		 Tensile
Rm (MPa)		 Impact
KV/Ku (J)		 Elongation
A (%)		 Reduction in cross section on fracture
Z (%)		 As-Heat-Treated Condition Brinell hardness (HBW)
969 (≥) 163 (≥) 14 14 34 Solution and Aging, Annealing, Ausaging, Q+T,etc 442

Physical Properties of steel grade 1.4435

Temperature
(°C)		 Modulus of elasticity
(GPa)		 Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and Thermal conductivity
(W/m·°C)		 Specific thermal capacity
(J/kg·°C)		 Specific electrical resistivity
(Ω mm²/m)		 Density
(kg/dm³)		 Poisson’s coefficient, ν
31 - -     0.13 -  
751 793 - 21.3 244   -  
797 - 14 14.2   223 141

Heat Treatment of steel grade 1.4435

Heat treated : 1291°C - 1449°C

Technological Curves of steel grade 1.4435

Cross Reference Table (Equivalent Grade) of 1.4435

Grade Standard Country Application
X2CrNiMo18-14-3
X2CrNiMo18-15-4
X2CrNiMo18-16-5
X2CrNiMo18-14-3
X2CrNiMo18-14-3
X2CrNiMo18-15-4
X2CrNiMo18-15-4
1.4435
1.4435
1.4435
1.4435
Z3CND17-11-02
Z3CND17-11-02
Z3CND17-11-02FF
Z3CND17-11-02FF

Relevant standard of 1.4435

DIN 17440 (1996) Stainless steels - Technical delivery conditions for drawn wire DIN-17440-(1996).pdf
DIN 17441 (1997) Stainless steels - Technical delivery conditions for cold rolled strips and slit coils strip and sheets cut from such strips for pressure purposes DIN-17441-(1997).pdf
DIN 17455 (1985) Welded circular tubes of stainless steels for general requirements; technical delivery conditions DIN-17455-(1985).pdf
DIN 17456 (1985) Seamless circular tubes of stainless steels for general requirements; technical delivery conditions DIN-17456-(1985)-.pdf
DIN 17457 (1985) Welded circular tubes of austenitic stainless steels for special requirements; technical delivery conditions DIN-17457-(1985).pdf
DIN 17458 (1985) Seamless circular tubes of austenitic stainless steels for special requirements; technical delivery conditions DIN-17458-(1985).pdf
DIN EN 10028-7 Flat products made of steels for pressure purposes - Part 7: Stainless steels DIN-EN-10028-7.pdf
DIN EN 10088-1 Stainless steels - Part 1: List of stainless steels DIN-EN-10088-1.pdf
DIN EN 10088-2 Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes DIN-EN-10088-2.pdf
DIN EN 10088-3 Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes DIN-EN-10088-3.pdf
DIN EN 10088-4 Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes DIN-EN-10088-4.pdf
DIN EN 10088-5 Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes DIN-EN-10088-5.pdf
DIN EN 10216-5 (2004) Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes DIN-EN-10216-5-(2004)-.pdf
DIN EN 10217-7 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes DIN-EN-10217-7.pdf
DIN EN 10222-5 Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels DIN-EN-10222-5.pdf
DIN EN 10250-4 Open die steel forgings for general engineering purposes - Part 4: Stainless steels DIN-EN-10250-4.pdf
DIN EN 10253-3 Butt-welding pipe fittings - Part 3: Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements DIN-EN-10253-3.pdf
DIN EN 10253-4 Butt-welding pipe fittings - Part 4: Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements DIN-EN-10253-4.pdf
DIN EN 10272 Stainless steel bars for pressure purposes DIN-EN-10272.pdf
DIN EN 10296-2 (2005) Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel DIN-EN-10296-2-(2005).pdf
DIN EN 10297-2 (2005) Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel DIN-EN-10297-2-(2005)-.pdf
X2CrNiMo18-14-3 Z 3 CND 17-11-02
Available Suppliers
Jiangyou Longhai Special Steel Co.,Ltd.
Jiangyou Longhai Special Steel Co.,Ltd.

Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...

Rfq.: sales@longhaisteel.com
  • Do you supply this 1.4435?
  • List your company on S&G now? Join
  • Non-paying users only
Top