France AFNOR NF EN 10088-1, NF EN 10088-2, NF EN 10088-3, NF EN 10088-5, NF EN 10297-2 (2005), X8CrNiS18-9 Specialsteel Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Category | Class | Grade | Type | Standard | Country | Application |
---|---|---|---|---|---|---|
Steel Grades | Specialsteel | X8CrNiS18-9 | Austenite | AFNOR | France | Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel |
C | Si | Mn | P | S | Cr | Mo | Ni | N | Cu |
---|---|---|---|---|---|---|---|---|---|
≤0.10 | ≤1.00 | ≤2.00 | ≤0.045 | 0.015 -0.035 | 17.00 -19.00 | ≤ ≥ | 8.00 -10.00 | ≤0.11 | ≤1.00 |
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
727 (≥) | 682 (≥) | 23 | 14 | 23 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 414 |
Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
---|---|---|---|---|---|---|---|
31 | - | - | 0.13 | - | |||
859 | 179 | - | 13.3 | 414 | - | ||
536 | - | 24 | 24.2 | 222 | 331 |
Heat treated : 1164°C - 1938°C
Grade | Standard | Country | Application |
---|---|---|---|
X8CrNiS18-9 |
NF EN 10088-1 | Stainless steels - Part 1: List of stainless steels | NF-EN-10088-1.pdf |
NF EN 10088-2 | Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes | NF-EN-10088-2.pdf |
NF EN 10088-3 | Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes | NF-EN-10088-3.pdf |
NF EN 10088-5 | Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes | NF-EN-10088-5.pdf |
NF EN 10297-2 (2005) | Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel | NF-EN-10297-2-(2005).pdf |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com