Chinese
Available 24/7 at contact@steel-grades.com
SGSG
Post Your Request Now
Toggle menu
Hello, Sign inMy Account

1.4301

Favorite Datasheet
X5CrNi18-10 X8CrNiS18-9
#X5CrNi18-10 #1-4301 #304 #0Cr18Ni9

Description

France AFNOR NF EN 10028-7, NF EN 10088-1, NF EN 10088-2, NF EN 10088-3, NF EN 10088-4, NF EN 10088-5, NF EN 10151, NF EN 10216-5 (2004), NF EN 10217-7, NF EN 10222-5, NF EN 10250-4, NF EN 10253-3, NF EN 10253-4, NF EN 10263-5, NF EN 10264-4 (2002), NF EN 10269, NF EN 10272, NF EN 10296-2 (2005), NF EN 10297-2 (2005), 1.4301 Specialsteel Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.

Datasheet for: Steel Grades:Specialsteel: 1.4301
Category Class Grade Type Standard Country Application
Steel GradesSpecialsteel 1.4301 Austenite AFNOR France Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel

Chemical composition(mass fraction)(wt.%) of the 1.4301

C Si Mn P S Cr Mo Ni N
≤0.070 ≤1.00 ≤2.00 ≤0.045 ≤0.015 17.00 -19.50 ≤ ≥ 8.00 -10.50 ≤0.11

Mechanical Properties of steel grade 1.4301

Yield
Rp0.2 (MPa)		 Tensile
Rm (MPa)		 Impact
KV/Ku (J)		 Elongation
A (%)		 Reduction in cross section on fracture
Z (%)		 As-Heat-Treated Condition Brinell hardness (HBW)
448 (≥) 789 (≥) 31 41 42 Solution and Aging, Annealing, Ausaging, Q+T,etc 323

Physical Properties of steel grade 1.4301

Temperature
(°C)		 Modulus of elasticity
(GPa)		 Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and Thermal conductivity
(W/m·°C)		 Specific thermal capacity
(J/kg·°C)		 Specific electrical resistivity
(Ω mm²/m)		 Density
(kg/dm³)		 Poisson’s coefficient, ν
33 - -     0.34 -  
596 513 - 21.3 424   -  
567 - 24 34.2   131 142

Heat Treatment of steel grade 1.4301

Heat treated : 1478°C - 1492°C

Technological Curves of steel grade 1.4301

Cross Reference Table (Equivalent Grade) of 1.4301

Grade Standard Country Application
X5CrNi18-10
X5CrNi18-10
X5CrNi18-10
304
S30400
304L
S30403
304H
S30409
S30415
S30430
S30432
304N
S30451
S30452
304HN
S30452
304LN
S30453
304LHN

Relevant standard of 1.4301

NF EN 10028-7 Flat products made of steels for pressure purposes - Part 7: Stainless steels NF-EN-10028-7.pdf
NF EN 10088-1 Stainless steels - Part 1: List of stainless steels NF-EN-10088-1.pdf
NF EN 10088-2 Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes NF-EN-10088-2.pdf
NF EN 10088-3 Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes NF-EN-10088-3.pdf
NF EN 10088-4 Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes NF-EN-10088-4.pdf
NF EN 10088-5 Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes NF-EN-10088-5.pdf
NF EN 10151 Stainless steel strip for springs - Technical delivery conditions NF-EN-10151.pdf
NF EN 10216-5 (2004) Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes NF-EN-10216-5-(2004).pdf
NF EN 10217-7 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes NF-EN-10217-7.pdf
NF EN 10222-5 Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels NF-EN-10222-5.pdf
NF EN 10250-4 Open die steel forgings for general engineering purposes - Part 4: Stainless steels NF-EN-10250-4.pdf
NF EN 10253-3 Butt-welding pipe fittings - Part 3: Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements NF-EN-10253-3.pdf
NF EN 10253-4 Butt-welding pipe fittings - Part 4: Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements NF-EN-10253-4.pdf
NF EN 10263-5 Steel rod, bars and steel wire for cold heading and cold extrusion - Part 5: Technical delivery conditions for stainless steels NF-EN-10263-5.pdf
NF EN 10264-4 (2002) Steel wire and wire products - Steel wire for ropes - Part 4: Stainless steel wire NF-EN-10264-4-(2002).pdf
NF EN 10269 Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties NF-EN-10269.pdf
NF EN 10272 Stainless steel bars for pressure purposes NF-EN-10272.pdf
NF EN 10296-2 (2005) Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel NF-EN-10296-2-(2005).pdf
NF EN 10297-2 (2005) Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel NF-EN-10297-2-(2005).pdf
X5CrNi18-10 X8CrNiS18-9
Available Suppliers
Jiangyou Longhai Special Steel Co.,Ltd.
Jiangyou Longhai Special Steel Co.,Ltd.

Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...

Rfq.: sales@longhaisteel.com
  • Do you supply this 1.4301?
  • List your company on S&G now? Join
  • Non-paying users only
Top