Japan FED G 4303 (2005), G 4304 (2010), G 4305 (2010), G 4308 (2007) , G 4309 (1999) , G 4317 (2005) , G 4318 (2007) , G 4320 (2003) , SUS 304L Specialsteel Stainless steel bars and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Category | Class | Grade | Type | Standard | Country | Application |
---|---|---|---|---|---|---|
Steel Grades | Specialsteel | SUS 304L | Austenite | FED | Japan | Stainless steel bars |
C | Si | Mn | P | S | Cr | Ni |
---|---|---|---|---|---|---|
≤0.030 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 18.00 -20.00 | 9.00 -13.00 |
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
645 (≥) | 665 (≥) | 31 | 33 | 22 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 121 |
Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
---|---|---|---|---|---|---|---|
21 | - | - | 0.22 | - | |||
325 | 674 | - | 41.3 | 342 | - | ||
283 | - | 21 | 23.2 | 111 | 444 |
Heat treated : 1821°C - 1198°C
Grade | Standard | Country | Application |
---|---|---|---|
304L | |||
304LN | |||
304LHN | |||
AL 304L | |||
304L | |||
304LN | |||
TP304L | |||
TP304LN | |||
TP304L | |||
TP304LN | |||
TP304L | |||
TP304LN | |||
TP304L | |||
TP304LN | |||
TP304L | |||
MT304L | |||
MT-304L | |||
TP304L | |||
TP304LN | |||
304L |
G 4303 (2005) | Stainless steel bars | G-4303--(2005).pdf |
G 4304 (2010) | Hot-rolled stainless steel plates, sheet and strip | G-4304--(2010).pdf |
G 4305 (2010) | Cold-rolled stainless steel plate, sheet and strip | G-4305--(2010).pdf |
G 4308 (2007) | Stainless steel wire rods | G-4308--(2007)-.pdf |
G 4309 (1999) | Stainless steel wires | G-4309--(1999)-.pdf |
G 4317 (2005) | Hot-formed stainless steel sections | G-4317--(2005)-.pdf |
G 4318 (2007) | Cold finished stainless steel bars | G-4318--(2007)-.pdf |
G 4320 (2003) | Cold-formed stainless steel sections | G-4320--(2003)-.pdf |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com