AL 304L High Alloy and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Category | Type | Steel Grade | Standard | Country | Application |
---|---|---|---|---|---|
Steel Grades | High Alloy | AL 304L | |||
AERMET100 |
|||||
AerMet 310 Alloy |
|||||
AF2-1DA |
|||||
AF-71 |
|||||
AF-913 |
|||||
AF-918 |
|||||
AF-1410 |
|||||
AF-1753 |
|||||
AFC77 |
|||||
AL 304DA |
C ≤ |
Si ≤ |
Mn ≤ |
P ≤ |
S ≤ |
Cr | Ni |
---|---|---|---|---|---|---|
1.10 | 24.5 | 20.0 | ||||
Mo | Al | Cu | Nb | Ti | V | Ce |
N | Co | Pb | B | Other | ||
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
842 (≥) | 412 (≥) | 43 | 43 | 11 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 434 |
Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
---|---|---|---|---|---|---|---|
12 | - | - | 0.44 | - | |||
979 | 671 | - | 13.3 | 431 | - | ||
752 | - | 21 | 12.2 | 333 | 133 |
Heat treated : 1774°C - 1285°C
Grade | Standard | Country | Application |
---|---|---|---|
SM2CrNi3MoAl1S | China | Plastic mould with flat steel | |
W6Mo5Cr4V2Al | China | High-speed tool steel | |
X1CrNiMoAl12-9 | AFNOR | France | Carbide for cutting tools |
X1CrNiMoAl12-9 | AFNOR | France | Carbide for cutting tools |
erralium255 | UNS | USA | Dual-phase steel |
erralium255 | UNS | USA | Dual-phase steel |
Valray1 | AISI | USA | Martensitic special steel |
Vicalloy | AISI | USA | Martensitic special steel |
Vitallium | AISI | USA | Martensitic special steel |
Waspaloy | UNS | USA | Martensitic special steel |
NiCr20TiAl | DIN | Germany | The high-temperature and high-strength steel |
X5NiCrAlTi31-20 | DIN | Germany | The high-temperature and high-strength steel |
X8NiCrAlTi32-21 | DIN | Germany | The high-temperature and high-strength steel |
X6CrAl13 | AFNOR | France | Ferritic |
X2CrAlTi18-2 | AFNOR | France | Ferritic |
ISO X6CrAl13 | ISO standard thermal deformation of stainless steel | ||
ISO X7CrNiAl17-7 | ISO standard thermal deformation of stainless steel | ||
ISO X8CrNiMoAl15-7-2 | ISO standard thermal deformation of stainless steel | ||
ISO X7CrNiAl17-7 wire | ISO standard spring with stainless steel wire and steel strip | ||
ISO X10CrAlSi18 | ISO standard iron grain size heat resistant steel |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com