Korea KS STF4 Carbide for cutting tools and STF4 Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Category | Type | Steel Grade | Standard | Country | Application |
---|---|---|---|---|---|
Steel Grades | Tool Steel And Hard Alloy | STF4 | KS | Korea | Carbide for cutting tools |
STD5 |
|||||
STD6 |
|||||
STD6 |
|||||
STD61 |
|||||
STD61 |
|||||
STD62 |
|||||
STD62 |
|||||
STF3 |
|||||
STF3 |
|||||
STF4 |
C(%) | Si(%) | Mn(%) | Cr(%) | Ni(%) | Mo(%) | V(%) |
---|---|---|---|---|---|---|
0.50-0.60 | ≤0.35 | 0.60-1.00 | 0.60-1.00 | 1.30-2.00 | 0.20-0.50 | <0.20 |
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
757 (≥) | 235 (≥) | 42 | 43 | 12 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 212 |
Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
---|---|---|---|---|---|---|---|
13 | - | - | 0.43 | - | |||
481 | 923 | - | 13.3 | 132 | - | ||
592 | - | 34 | 43.2 | 233 | 433 |
Heat treated : 1614°C - 1568°C
Grade | Standard | Country | Application |
---|---|---|---|
STF4 | KS | Korea | Carbide for cutting tools |
STF4 | KS | Korea | Carbide for cutting tools |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com