USA AISI CX-2 W-Ta-Co class carbide and CX-2 Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
| Category | Type | Steel Grade | Standard | Country | Application |
|---|---|---|---|---|---|
| Steel Grades | Tool Steel And Hard Alloy | CX-2 | AISI | USA | W-Ta-Co class carbide |
| CU-2 |
|||||
| CU-3 |
|||||
| CU-4 |
|||||
| CU-5 |
|||||
| CW-1 |
|||||
| CW-2 |
|||||
| CW-3 |
|||||
| CW-4 |
|||||
| CW-5 |
|||||
| CX-1 |
| Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 719 (≥) | 188 (≥) | 32 | 34 | 11 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 313 |
| Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
|---|---|---|---|---|---|---|---|
| 11 | - | - | 0.21 | - | |||
| 919 | 852 | - | 11.3 | 111 | - | ||
| 271 | - | 13 | 43.2 | 223 | 431 |
Heat treated : 1165°C - 1642°C
| Grade | Standard | Country | Application |
|---|---|---|---|
| CX-2 | AISI | USA | W-Ta-Co class carbide |
| CX-2MW | AISI | USA | |
| CX-2MW | ASTM | USA | Castings, Nickel and Nickel Alloy |
| CX-2MW | ASTM | USA | Castings, Nickel and Nickel Alloy |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com