Sweden SS ASP 60 PM Carbide for cutting tools and ASP 60 PM Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Category | Type | Steel Grade | Standard | Country | Application |
---|---|---|---|---|---|
Steel Grades | Tool Steel And Hard Alloy | ASP 60 PM | SS | Sweden | Carbide for cutting tools |
HSP-17 |
|||||
HSP-41 |
|||||
HSP-41 |
|||||
HSP-42 |
|||||
HSP-42 |
|||||
ASP 23 PM |
|||||
ASP 23 PM |
|||||
ASP 30 PM |
|||||
ASP 30 PM |
|||||
ASP 60 PM |
C(%) | Si(%) | Mn(%) | P(%) | S(%) | Cr(%) | Mo(%) | V(%) | W(%) | Co(%) |
---|---|---|---|---|---|---|---|---|---|
2.25-2.40 | ≤0.45 | ≤0.40 | ≤0.030 | ≤0.030 | 3.70-4.50 | 6.50-7.30 | 6.00-6.70 | 6.00-6.80 | 9.80-11.0 |
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
162 (≥) | 973 (≥) | 41 | 23 | 41 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 144 |
Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
---|---|---|---|---|---|---|---|
24 | - | - | 0.34 | - | |||
586 | 522 | - | 14.3 | 312 | - | ||
658 | - | 22 | 23.2 | 313 | 424 |
Heat treated : 1485°C - 1186°C
Grade | Standard | Country | Application |
---|---|---|---|
ASP 60 PM | SS | Sweden | Carbide for cutting tools |
ASP 60 PM | SS | Sweden | Carbide for cutting tools |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com