ISO ISO 95MnWCr5 Carbide for cutting tools and 95MnWCr5 Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Category | Type | Steel Grade | Standard | Country | Application |
---|---|---|---|---|---|
Steel Grades | Tool Steel And Hard Alloy | 95MnWCr5 | ISO | ISO | Carbide for cutting tools |
C120U |
|||||
105V |
|||||
105V |
|||||
50WCrV8 |
|||||
50WCrV8 |
|||||
60WCrV8 |
|||||
60WCrV8 |
|||||
70MnMoCr8 |
|||||
70MnMoCr8 |
|||||
95MnWCr5 |
C(%) | Si(%) | Mn(%) | P(%) | S(%) | Cr(%) | V(%) | W(%) |
---|---|---|---|---|---|---|---|
0.90-1.00 | 0.10-0.40 | 1.05-1.35 | ≤0.030 | ≤0.030 | 0.40-0.65 | 0.05-0.20 | 0.40-0.70 |
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
818 (≥) | 555 (≥) | 11 | 21 | 13 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 434 |
Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
---|---|---|---|---|---|---|---|
34 | - | - | 0.22 | - | |||
819 | 716 | - | 24.3 | 213 | - | ||
878 | - | 33 | 34.2 | 114 | 114 |
Heat treated : 1111°C - 1147°C
Grade | Standard | Country | Application |
---|---|---|---|
95MnWCr5 | ISO | ISO | Carbide for cutting tools |
95MnWCr5 | ISO | ISO | Carbide for cutting tools |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com