ISO ISO 40CrMnNiMo8-6-4① Carbide for cutting tools and 40CrMnNiMo8-6-4① Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Category | Type | Steel Grade | Standard | Country | Application |
---|---|---|---|---|---|
Steel Grades | Tool Steel And Hard Alloy | 40CrMnNiMo8-6-4① | ISO | ISO | Carbide for cutting tools |
60WCrV8 |
|||||
70MnMoCr8 |
|||||
70MnMoCr8 |
|||||
95MnWCr5 |
|||||
95MnWCr5 |
|||||
X153CrMoV12 |
|||||
X153CrMoV12 |
|||||
35CrMo7 |
|||||
35CrMo7 |
|||||
40CrMnNiMo8-6-4① |
C(%) | Si(%) | Mn(%) | P(%) | S(%) | Cr(%) | Ni(%) | Mo(%) |
---|---|---|---|---|---|---|---|
0.35-0.45 | 0.20-0.40 | 1.30-1.60 | ≤0.030 | ≤0.030 | 1.80-2.10 | 0.90-1.20 | 0.15-0.25 |
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
715 (≥) | 593 (≥) | 23 | 14 | 23 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 134 |
Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
---|---|---|---|---|---|---|---|
42 | - | - | 0.21 | - | |||
953 | 314 | - | 12.3 | 124 | - | ||
986 | - | 21 | 32.2 | 233 | 133 |
Heat treated : 1287°C - 1296°C
Grade | Standard | Country | Application |
---|---|---|---|
40CrMnNiMo8-6-4 | DIN | Germany | Cold working alloy tool steel |
40CrMnNiMo8-6-4① | ISO | ISO | Carbide for cutting tools |
40CrMnNiMo8-6-4① | ISO | ISO | Carbide for cutting tools |
EN 40CrMnNiMo8-6-4 | EN | Euronorm | Euronorm Tool steel |
BT2① | UK | Carbide for cutting tools | |
BT2① | UK | Carbide for cutting tools | |
BT20① | SS | UK | Carbide for cutting tools |
BT20① | SS | UK | Carbide for cutting tools |
BT20① | SS | UK | Carbide for cutting tools |
BT20① | SS | UK | Carbide for cutting tools |
BM34① | UK | Carbide for cutting tools | |
BM34① | UK | Carbide for cutting tools | |
BHMA①:9-1-9 | UK | Carbide for cutting tools | |
BHMA①:9-1-9 | UK | Carbide for cutting tools | |
BHMA①:7-1-9 | UK | Carbide for cutting tools | |
BHMA①:7-1-9 | UK | Carbide for cutting tools | |
BHMA①:9-2-6 | UK | Carbide for cutting tools | |
BHMA①:9-2-6 | UK | Carbide for cutting tools | |
BHMA①:6-3-5 | UK | Carbide for cutting tools | |
BHMA①:6-3-5 | UK | Carbide for cutting tools |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
REQUEST FOR QUOTATION