China GBT 80 China structural steel and alloy steel and 80 Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Category | Type | Steel Grade | Standard | Country | Application |
---|---|---|---|---|---|
Steel Grades | Structure Steel | 80 | GBT | China | China structural steel and alloy steel |
30 |
|||||
35 |
|||||
40 |
|||||
45 |
|||||
50 |
|||||
55 |
|||||
60 |
|||||
65 |
|||||
70 |
|||||
75 |
C(%) | Si(%) | Mn(%) | P(%) | S(%) | Cr(%) | Ni(%) | Cu(%) |
---|---|---|---|---|---|---|---|
0.77-0.85 | 0.17-0.37 | 0.50-0.80 | 0.035 | 0.035 | 0.25 | 0.3 | 0.25 |
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
351 (≥) | 635 (≥) | 22 | 13 | 22 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 131 |
Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
---|---|---|---|---|---|---|---|
24 | - | - | 0.43 | - | |||
486 | 585 | - | 24.3 | 331 | - | ||
177 | - | 21 | 13.2 | 321 | 244 |
Heat treated : 1518°C - 1262°C
Grade | Standard | Country | Application |
---|---|---|---|
UNS G10080 | UNS | USA | General use carbon steel bar |
UNS G10180 | UNS | USA | General use carbon steel bar |
C80W1 | Germany | Carbon tool steel | |
C80W2 | DIN | Germany | Carbon tool steel |
1.2080 | DIN | Germany | Cold working alloy tool steel |
80CrV2 | DIN | Germany | Cold working alloy tool steel |
80WCrV8 | DIN | Germany | Cold working alloy tool steel |
1.2880 | DIN | Germany | Cold working alloy tool steel |
SK80 | JIS | Japan | Carbon tool steel |
TC80 | JIS | Japan | Carbon tool steel |
AC805 | JIS | Japan | Carbide for cutting tools |
AC805 | JIS | Japan | Carbide for cutting tools |
X80MoCrV42-16 | AFNOR | France | Carbide for cutting tools |
X80MoCrV42-16 | AFNOR | France | Carbide for cutting tools |
SS14:1880 | SS | Sweden | Carbide for cutting tools |
SS14:1880 | SS | Sweden | Carbide for cutting tools |
C80U | ISO | ISO | Carbide for cutting tools |
C80U | ISO | ISO | Carbide for cutting tools |
UNS S42800 | UNS | USA | Martensitic special steel |
AISI S13800 | USA | precipitation hardening |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com